Going out of A business

[Clatterville trolley]

If I really was in business I would call this "concentrating on my core interests"

After reflecting on the state of my 'workshop' and the amount of clutter there I have decided to sell most, if not all of my Model A parts. I will list some now and then add photos ASAP. More will be listed as I dig them out. This isn't a fire sale, but would like to get them moved so I can quit being distracted and stay focused on one project for a change. Who knows I might even finish something!

** Diamond block short block - first picture in #3 response shows the diamond clearly - (no head or accessories), but crank & pistons it is a Model A block not a Model B as I thought originally, sorry for the mistaken identification - SOLD!
** 1928-29 Model A cowl section for closed car (not 4-door) has been blasted and has solid side panels with top half of gas tank - $200 SOLD!
** Cast iron head with 'C' cast in it (for B block, 1932 to 34) - $150
**3 bolt water pump rebuildable core - (for the above head) - $50
** CCPU original sun visor - $60
** New wood sill kit for Murray 4 door sedan brand new in the box, only out to check for complete shipment - (1929) - $550
** 1928-29 Driver and Passenger doors for CCPU - have new bottom inner and outer patch panels ready to be installed - $380 Driver door sold and both pair of patch panels!!
** Model A Ford script head, good - $50 SOLD!!
** Original front axle - $50
** Original front wishbone - $65
** New repro front spring - $40
** Spring perches - brand new - $110 SOLD!!
** Tudor front seats, have a pair of really nice ones. Currently covered with gaudy material, but at least protected them - $250 for pair SOLD!

Prefer to have large parts picked up here at my house in Columbia, MO, but if you are set on having them shipped all charges including packaging and shipping are on you. I will accept PayPal for payment and / or deposit to hold until you come to pick up your parts and pay the rest then.
Please add 3 % to your total to take care of their charges to sellers on PayPal.
Also will accept Postal money orders for payments.

I will add photos and more parts as I dig them out. Thanks, Jay

Have added photos and some more parts - will keep doing that along so that I can keep up with emails, PM's, shipping, etc. and not get behind. So, keep checking back! I intend to clear out the entire lot before I'm done. Thanks for looking, Jay

[Clatterville trolley]

++ Midwest tin sent me a PM with the following information regarding this cylinder head:

"Thanks for sending the photos. The head is a 32 to 34 B block head. The water pump indicates so. Not Model A"


DSCN0829 (640x480).jpg

DSCN0827 (640x480).jpg

DSCN0831 (640x480).jpg

DSCN0832 (640x480).jpg

DSCN0853 (640x480).jpg

DSCN0852 (640x480).jpg

DSCN0855 (640x480).jpg

DSCN0856 (640x480).jpg

DSCN0857 (640x480).jpg

DSCN0858 (640x480).jpg

DSCN0869 (640x480).jpg

DSCN0872 (640x480).jpg

DSCN0874 (640x480).jpg

[Clatterville trolley]

DSCN0881 (640x480).jpg

DSCN0882 (640x480).jpg

DSCN0877 (640x480).jpg

DSCN0878 (640x480).jpg

DSCN0879 (640x480).jpg

DSCN0880 (640x480).jpg

DSCN0875 (640x480).jpg

[Clatterville trolley]

Here are pictures of 28-29 cowl I have for sale. A bit of explanation is in order about what you see.
I gathered these parts separately in preparation to build a speedster. As you can see there are magic marker lines to indicate where I was going to round off the w/s support and smooth it with metal. Also, had intended to remove area around filler neck and replace with smooth metal - see marker line again. The w/s chrome posts are from a TR3 to give it a 'racy' appearance.
In pictures I have it all held together with vise-grips to show what it looks like together - then other photos show better views of each individual piece dis-assembled.

DSCN0890 (640x480).jpg

DSCN0888 (640x480).jpg

DSCN0889 (640x480).jpg

DSCN0891 (640x480).jpg

DSCN0892 (640x480).jpg

DSCN0895 (640x480).jpg

DSCN0896 (640x480).jpg

DSCN0898 (640x480).jpg

DSCN0899 (640x480).jpg

DSCN0897 (640x480).jpg

DSCN0900 (640x480).jpg

DSCN0902 (640x480).jpg

DSCN0903 (640x480).jpg

DSCN0904 (640x480).jpg

DSCN0905 (640x480).jpg

[Clatterville trolley]

Time for a bump!

[Clatterville trolley]

Sponsored Links (Register now to hide all advertisements)

Bumpski time!

[Clatterville trolley]

Post vacation bump - help me pay the VISA bill after my trip!!

[Clatterville trolley]

Originally Posted by Clatterville trolley

If I really was in business I would call this "concentrating on my core interests"

After reflecting on the state of my 'workshop' and the amount of clutter there I have decided to sell most, if not all of my Model A parts. I will list some now and then add photos ASAP. More will be listed as I dig them out. This isn't a fire sale, but would like to get them moved so I can quit being distracted and stay focused on one project for a change. Who knows I might even finish something!

** Diamond block short block - first picture in #3 response shows the diamond clearly - (no head or accessories), but crank & pistons it is a Model A block not a Model B as I thought originally, sorry for the mistaken identification - $350
** 1928-29 Model A cowl section for closed car (not 4-door) has been blasted and has solid side panels with top half of gas tank - $200 SOLD!
** Cast iron head with 'C' cast in it (for B block, 1932 to 34) - $150
**3 bolt water pump rebuildable core - (for the above head) - $50
** CCPU original sun visor - $60
** New wood sill kit for Murray 4 door sedan brand new in the box, only out to check for complete shipment - (1929) - $550
** 1928-29 Driver and Passenger doors for CCPU - have new bottom inner and outer patch panels ready to be installed - $380
** Model A Ford script head, good - $50 SOLD!!
** Original front axle - $50
** Original front wishbone - $65
** New repro front spring - $40
** Spring perches - brand new - $110 SOLD!!
** Tudor front seats, have a pair of really nice ones. Currently covered with gaudy material, but at least protected them - $250 for pair

Prefer to have large parts picked up here at my house in Columbia, MO, but if you are set on having them shipped all charges including packaging and shipping are on you. I will accept PayPal for payment and / or deposit to hold until you come to pick up your parts and pay the rest then.
Please add 3 % to your total to take care of their charges to sellers on PayPal.
Also will accept Postal money orders for payments.

I will add photos and more parts as I dig them out. Thanks, Jay

Have added photos and some more parts - will keep doing that along so that I can keep up with emails, PM's, shipping, etc. and not get behind. So, keep checking back! I intend to clear out the entire lot before I'm done. Thanks for looking, Jay

I will have many of the parts that haven't sold and lots more small parts at my swap space this weekend at Sedalia, MO on the State Fair grounds! Come by and help me move this stuff out. See you there. Jay

[Clatterville trolley]

Post swap meet Bump-sa-duzy!

[Clatterville trolley]

Time for a bump to the top.

[Clatterville trolley]

Overdue for a bump - to the top!

[Clatterville trolley]

Ttt - Ok, Let's get busy buying and clean out the last of this ad!

[Clatterville trolley]

Time for another chance to get the last of these goodies!

[Clatterville trolley]

Pre - weekend bump.

[Clatterville trolley]

Seats sold and will ship today! Jay

[Clatterville trolley]

Everything but the passenger door for 28-29 CCPU sold this morning or has already been sold previously. Thanks Fordbarn! Jay