The Ford Barn

Sparky · 08-21-2013, 07:59 AM

Is there an easy way to tell an original style cam from the "improved" B version cam?

Tom Wesenberg · 08-21-2013, 08:33 AM

Yes, the original A cam has 8 distinct lines, while the B cam has 4. I posted a picture of them side by side and will do a search for it.

Tom Wesenberg · 08-21-2013, 08:41 AM

Check reply #15 in this link for the picture.

https://www.fordbarn.com/forum/showth...ence+wesenberg

Sparky · 08-21-2013, 08:56 AM

Sponsored Links (Register now to hide all advertisements)

Perfect, thanks Tom!

08-21-2013, 08:33 AM	#2
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Distributor cam identification Yes, the original A cam has 8 distinct lines, while the B cam has 4. I posted a picture of them side by side and will do a search for it.

08-21-2013, 08:41 AM	#3
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Distributor cam identification Check reply #15 in this link for the picture. https://www.fordbarn.com/forum/showth...ence+wesenberg

08-21-2013, 08:56 AM	#4
Sparky Senior Member Join Date: May 2010 Location: Rhode Island Posts: 649	Re: Distributor cam identification Sponsored Links (Register now to hide all advertisements) Perfect, thanks Tom!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-21-2013, 07:59 AM	#1
Sparky Senior Member Join Date: May 2010 Location: Rhode Island Posts: 649	Distributor cam identification Is there an easy way to tell an original style cam from the "improved" B version cam?