The Ford Barn

Graeme / New Zealand · 08-17-2018, 08:45 PM

Quote:

Originally Posted by Karl

Yep very distinctive - This is my favorite NZ shot
Canterbury side of Arthur's Pass .1934 purring along at 60 mph and not a car in sight . Awesome

My late Grandmother was from the West Cost and always referred to "Arthurs Pass" as " Parthers ass".

GB

Dave Castle · 08-17-2018, 09:41 PM

Ya that would be a Carpenter answer !!!

Tinker · 08-17-2018, 09:47 PM

It's a shame that you can't get a simple gasket with pumps. Napa has flat material for gaskets. Makes you wonder about the pumps.

You can make a lot of simple gaskets with a razor blade and a brass fuel line fitting as a hole punch.

08-17-2018, 09:41 PM	#22
Dave Castle Senior Member Join Date: Jun 2017 Location: Carmel, Ca Posts: 269	Re: Dennis Carpenter gasket problem Ya that would be a Carpenter answer !!!

08-17-2018, 09:47 PM	#23
Tinker Senior Member Join Date: May 2010 Location: MN Posts: 7,053	Re: Dennis Carpenter gasket problem It's a shame that you can't get a simple gasket with pumps. Napa has flat material for gaskets. Makes you wonder about the pumps. You can make a lot of simple gaskets with a razor blade and a brass fuel line fitting as a hole punch.