|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-20-2019, 10:57 PM | #1 |
Junior Member
Join Date: Dec 2014
Posts: 1
|
1953 crestline heder panel molding same as 54 ?
I need the header panel molding that goes above the grill and down the front of the front fenders but all i have been able to find is the 54 molding quite a drive so i would like to find out if the 54 molding will work on my 53 before i make the journey.
Thanks in advance Oldcarnut47 |
07-22-2019, 06:00 AM | #2 |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: 1953 crestline heder panel molding same as 54 ?
The PN INFO was removed from the 49/59 MPC and one would need an early 50'S BODY CATALOG to see if they are actually the same.
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) |
Sponsored Links (Register now to hide all advertisements) |
|
07-22-2019, 12:14 PM | #3 |
Senior Member
Join Date: Dec 2011
Location: Oakville Ontario
Posts: 586
|
Re: 1953 crestline heder panel molding same as 54 ?
it will not work they are different in that the 53 is a two piece while the 54 is one piece the panel is also quite different.changing the panel and trim together will not work either as they differ quite a bit
Last edited by 54vicky; 07-26-2019 at 08:47 AM. |
07-22-2019, 03:26 PM | #4 | |
Senior Member
Join Date: May 2010
Location: Phoenix,AZ
Posts: 1,417
|
Re: 1953 crestline heder panel molding same as 54 ?
Sponsored Links (Register now to hide all advertisements)
Quote:
|
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|