29 Coupe B pillar length needed

[baspinall]

I need to fab up the "foot" portion for both my B pillars on my coupe. Does anyone have the total length of a B pillar? Want to know how much I am actually missing.

[rotorwrench]

Ultimately, your doors will have to fit the opening and have decent gaps on the inside with good fit to the curvature of the body. Doors on the model A cars have to fit well to make certain they latch and stay that way on the road. If your B pillars are crusty, what sort of shape is the floor and door sill in?

[baspinall]

The car is completely apart. Almost every panel and post are from different cars. No floor. I do have a half decent subrail assembly.

[baspinall]

Not going to add the piece I make until I assemble was just curious how much I was missing

[MickeyT]

This may help.

http://www.fordgarage.com/pages/bodymeasurements.htm

[baspinall]

Sponsored Links (Register now to hide all advertisements)

That should work. Assuming the 30-31's are the same size. Thanks

[rotorwrench]

You can see the difference from right to left is really quite a bit on Vince's measurements. This is why fitting to other components is very important during build up. At least it gives you a ball park figure though.