|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-02-2019, 11:29 AM | #1 |
Member
Join Date: Nov 2014
Posts: 35
|
Rewooding '24 = Frustration
Maybe someone has more experience here than I do.
I am trying to rewood a 1924 front half of a touring body. Has anyone done any rewooding not using a kit? I have a set of brand new sills that were given to me, and my body had most of the upright pieces left on it. I figured it would be fairly easy to do this and remake the pieces---it has proven to be most difficult. I am to the point, I am wondering if it would be easier to try and hang all the sheet metal and work from the inside of the body to get the "correct" angles of my upright pieces. I don't know where exactly they should be, and its causing some irritation, and me cutting up some very expensive ash wood. There are some metal reinforcement brackets that are use to tie certain areas together, but it seems like if you tighten them down, in the cowl area, things start getting really far off. Any advice anyone could give would be most helpful. |
09-03-2019, 11:12 AM | #2 |
Senior Member
Join Date: Feb 2017
Location: lancaster Ca.
Posts: 107
|
Re: Rewooding '24 = Frustration
Yep. Years ago a friend and I rewooded my 19 touring by hand using old pieces as a guide. We had basic wood tools and had a great time doing it. For example, for the corner piece of the back of the seat ( right behind the drivers left shoulder ) has two radius. One curving from side to back and another rolling up. We started with a 4x4 block of ash and worked it into a perfect duplicate. Yeah it takes time but we had a great time and learned a lot. If you want it done quickly get a kit, but making these pieces yourself, you learn about wood working and have the satisfaction of doing it yourself.
|
Sponsored Links (Register now to hide all advertisements) |
|
09-04-2019, 05:19 PM | #3 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,426
|
Re: Rewooding '24 = Frustration
With poor patterns or no patterns at all, it makes the job a trial and fit game. The sheet metal is part of the fit so it has to be involved to get good fit and finish of everything.
Where you have no patterns or not so good ones. A person can use soft foam like the formaldehyde based stuff to rough out pieces to get a fit. This will at least give a person a pattern to work with. It may not be a perfect one but who cares as long as it gives a good fit to the metal parts and your doors will close and pretty much stay that way. Someone is bound to have done a 1924 Touring out there. The clubs are also good places to check. Ford Wood prices pieces separately but I can't vouch for fit since I haven't used their pieces. https://fordwood.com/images/tour23new.jpg |
09-04-2019, 07:06 PM | #4 |
Senior Member
Join Date: May 2010
Location: Portland OR
Posts: 6,340
|
Re: Rewooding '24 = Frustration
Even with a kit, there still is a LOT of fitting involved. Ones size does not fit all.
__________________
I know the voices aren't real but damn they have some good ideas! |
09-05-2019, 07:10 AM | #5 |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,509
|
Re: Rewooding '24 = Frustration
We have a complete Wood Shop in-house along with a full-time craftsman doing just wood, so I can likely offer a few tips. To begin with, is the body Sheetmetal in bare metal or is it still painted?
Can you post a few pictures of those brackets and show us what the issue is? |
09-07-2019, 05:33 PM | #6 |
Member
Join Date: Nov 2010
Posts: 48
|
Re: Rewooding '24 = Frustration
Sponsored Links (Register now to hide all advertisements)
|
09-08-2019, 07:41 AM | #7 |
Senior Member
Join Date: Aug 2012
Location: Takoma Park, MD
Posts: 2,817
|
Re: Rewooding '24 = Frustration
|
09-08-2019, 02:06 PM | #8 |
Senior Member
Join Date: May 2010
Location: Camarillo, CA and Pine Grove, CA
Posts: 2,832
|
Re: Rewooding '24 = Frustration
I spoke with them last month. They said the may be making some more wood in a couple months. Probably when the weather changes and they can't enjoy he outdoors.
__________________
1921 Runabout 1930 Tudor Early 1930 AA Speed costs money. How fast do you want to go? |
09-09-2019, 06:32 AM | #9 |
Senior Member
Join Date: Aug 2012
Location: Takoma Park, MD
Posts: 2,817
|
Re: Rewooding '24 = Frustration
Do they have any in stock or do they make to order? I have been holding off ordering mine until I get the title straightened out. I am ready and raring to go now...
|
09-09-2019, 01:19 PM | #10 |
Member
Join Date: May 2010
Location: Washington Iowa
Posts: 93
|
Re: Rewooding '24 = Frustration
The late Jerry Sweet of Ely, Iowa who built many,many bodies once told me to fit the wood to the metal as there where several body makers for Ford and also there were replacement parts makers even back then, sure made it easier.
|
09-09-2019, 03:30 PM | #11 |
Senior Member
Join Date: May 2010
Posts: 420
|
Re: Rewooding '24 = Frustration
i do wood work, but have yet to tackle a early car like your touring.. needless to say, Id be interested in talking to you about the job.. send me a pm..
jeff
__________________
Pennsylvania has two seasons. Hershey week, and everything else https://sites.google.com/site/eastcoastwoodies/ |
09-11-2019, 07:08 PM | #12 |
Senior Member
Join Date: May 2010
Location: CLAYTON DE
Posts: 1,283
|
Re: Rewooding '24 = Frustration
Correct me please, if I'm wrong. I read long ago that Ash and was used for wheels. Interior structure was Maple. I would look for the reference, but it's been too long ago.
__________________
Enjoy yer day. Tom Hate can't fix what it started. |
09-12-2019, 09:37 PM | #13 |
Member
Join Date: May 2010
Location: Washington Iowa
Posts: 93
|
Re: Rewooding '24 = Frustration
Hickory for wheel spokes, Ash or maple for body wood
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|