Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 02-07-2015, 09:30 AM   #1
Tim Armstrong
Senior Member
 
Tim Armstrong's Avatar
 
Join Date: May 2010
Location: NW Arkansas
Posts: 361
Default 30 vs 31 front fenders

Is it possible to remove the apron extension on a 30 fender and use it on a 31?
Tim Armstrong is offline   Reply With Quote
Old 02-07-2015, 09:45 AM   #2
Kevin in NJ
Senior Member
 
Join Date: May 2010
Location: South East NJ
Posts: 3,174
Default Re: 30 vs 31 front fenders

The flange may need to be extended to have enough room to make room for the bolt holes. The flange on some of the 30 fenders I have seen were not long enough to allow for the elongated bolt holes used on the 31. Yes, Ford had oval holes to allow for room with fitting.
__________________
Cabriolet and Technical Hints
Kevin in NJ is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 02-07-2015, 09:46 AM   #3
BRENT in 10-uh-C
Senior Member
 
BRENT in 10-uh-C's Avatar
 
Join Date: May 2010
Location: Eastern Tennessee
Posts: 9,335
Default Re: 30 vs 31 front fenders

Yes but you will need to extend that flange by about .250-.350 where you can drill the holes to bolt the one-piece aprons to.
__________________
.

BRENT in 10-uh-C
.
www.model-a-ford.com
...(...Finally Updated!! )

.
BRENT in 10-uh-C is offline   Reply With Quote
Old 02-07-2015, 09:47 AM   #4
BRENT in 10-uh-C
Senior Member
 
BRENT in 10-uh-C's Avatar
 
Join Date: May 2010
Location: Eastern Tennessee
Posts: 9,335
Default Re: 30 vs 31 front fenders

( guess Kevin types faster than I do! )
__________________
.

BRENT in 10-uh-C
.
www.model-a-ford.com
...(...Finally Updated!! )

.
BRENT in 10-uh-C is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 02:25 AM.