Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 04-14-2020, 10:14 PM   #1
Bubsyouruncle
Senior Member
 
Join Date: Aug 2013
Location: Gurnee, Illinois
Posts: 269
Default Factory welding

The lines of body welding in my '32 5 window, on the inside, are very regular. Look like automatic, not hand done. How was that done back then?
Bubsyouruncle is offline   Reply With Quote
Old 04-14-2020, 10:37 PM   #2
fordor41
Senior Member
 
fordor41's Avatar
 
Join Date: Oct 2011
Location: elmira,ny
Posts: 1,505
Default Re: Factory welding

I assume after welding a million they got it figured out pretty well
fordor41 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 04-15-2020, 12:21 AM   #3
T Scott
Senior Member
 
Join Date: Aug 2010
Location: East Boothbay, Maine
Posts: 272
Default Re: Factory welding

I think those are resistance welds similar to the way band saw blades are joined but that's just a guess. I would think it would take a pile of amps to do the job since some of those welds are 12'' or more.
T Scott is offline   Reply With Quote
Old 04-15-2020, 01:58 AM   #4
51 MERC-CT
Senior Member
 
51 MERC-CT's Avatar
 
Join Date: May 2010
Location: East Hartford, Ct
Posts: 5,898
Default Re: Factory welding

As stated, it's called 'flash butt welding'
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES
51 MERC-CT is offline   Reply With Quote
Old 04-15-2020, 05:07 AM   #5
DavidG
Senior Member
 
DavidG's Avatar
 
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,069
Default Re: Factory welding

And machine done, not by hand.
DavidG is offline   Reply With Quote
Old 04-15-2020, 05:52 AM   #6
37 Cab
Senior Member
 
37 Cab's Avatar
 
Join Date: Dec 2014
Location: Miami Oklahoma
Posts: 535
Default Re: Factory welding

Sponsored Links (Register now to hide all advertisements)
What about the Briggs and Murray bodies that were made into roadsters and cabriolets of the mid to late 30s? The welds inside the body on my car look hand done. For example the reinforcement of the rockers.
__________________
Tommy
37 Cab is offline   Reply With Quote
Old 04-15-2020, 06:14 AM   #7
DavidG
Senior Member
 
DavidG's Avatar
 
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,069
Default Re: Factory welding

The question posed regarded a Ford-built '32 standard coupe body.
DavidG is offline   Reply With Quote
Old 04-15-2020, 07:00 AM   #8
51 MERC-CT
Senior Member
 
51 MERC-CT's Avatar
 
Join Date: May 2010
Location: East Hartford, Ct
Posts: 5,898
Default Re: Factory welding

Quote:
Originally Posted by 37 Cab View Post
What about the Briggs and Murray bodies that were made into roadsters and cabriolets of the mid to late 30s? The welds inside the body on my car look hand done. For example the reinforcement of the rockers.
Those were not mass produced and would have been hand welded where fabrication was not time sensitive.
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES
51 MERC-CT is offline   Reply With Quote
Old 04-15-2020, 09:50 AM   #9
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,369
Default Re: Factory welding

The machines they developed to weld the model A gas tanks was some relatively new technology for the time. The technology evolved as it was needed.
rotorwrench is offline   Reply With Quote
Old 04-15-2020, 05:26 PM   #10
Pete
Senior Member
 
Pete's Avatar
 
Join Date: May 2010
Location: Wa.
Posts: 5,374
Default Re: Factory welding

Quote:
Originally Posted by rotorwrench View Post
The machines they developed to weld the model A gas tanks was some relatively new technology for the time. The technology evolved as it was needed.
The same resistance welding technique was used to weld the bottoms on the hollow steel valve lifters for the V8 engines.
Pete is offline   Reply With Quote
Old 04-16-2020, 09:44 PM   #11
Bubsyouruncle
Senior Member
 
Join Date: Aug 2013
Location: Gurnee, Illinois
Posts: 269
Default Re: Factory welding

Thank you, all of you. Automatic resistance welding was my guess, with nothing to go on. Looking at many of the other welds revealed by stripping the interior demonstrates how much investment was made to make these panels. Each weldment had to have a pair of matching "things" that held the parts next to each other and then jam them together the right distance and the correct amperage for the right time.


Kinda worked to build B-24s some years later, ya think?
Bubsyouruncle is offline   Reply With Quote
Old 04-16-2020, 09:57 PM   #12
RB
Senior Member
 
RB's Avatar
 
Join Date: May 2010
Location: papillion nebraska
Posts: 406
Default Re: Factory welding

The 1932 & others year fuel tanks had a rather harsh & sharp crimped edge with a full perimeter weld where the upper & lower portions were joined
RB is offline   Reply With Quote
Old 04-16-2020, 10:03 PM   #13
tubman
Senior Member
 
tubman's Avatar
 
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,260
Default Re: Factory welding

While we're talking about Ford's unique welding capabilities, what about the way they electrically welded the stainless steel sides to the cast iron block on the early V8-60's.

I hear that nobody knows how they did it.
tubman is offline   Reply With Quote
Old 04-16-2020, 10:15 PM   #14
Lawrie
Senior Member
 
Lawrie's Avatar
 
Join Date: May 2010
Location: Qld, Australia
Posts: 4,195
Default Re: Factory welding

And welding the spokes
Lawrie
Lawrie is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 04:34 PM.