Leaf spring alignment bolt under axle pad

[WABOOM]

Originally Posted by tubman

I find the part about using a heat gun to cure the paint to be interesting. I have an old kitchen oven converted for use to cure parts I have powder-coated. I have also used it to cure painted small parts. It seems to help with the hardness and durability of the finish.

It helps enamel cure big time. Sometimes I even pre-heat the parts with the heat gun. Super durable. I use it on firearms quite a bit. I did this on a crappy set of combination wrenches, and it's a really tough finish. Those wrenches are still looking good after getting knocked around for over 5 years.

I'm getting to the point where I use engine enamel with ceramic (VHT) for most of my rattle can needs.

[WABOOM]

Back on the road! The difference is unbelievable. I put new shocks on all around too. It's so much better.

[RalphM]

That is one beautiful Merc!

[WABOOM]

I didn't bother putting the center caps and fender skirts due to being in a hurry.

[JSeery]

Looking good!

[19Fordy]

Sponsored Links (Register now to hide all advertisements)

Very spiffy. A beautiful car.

[Russ/40]

VERY nice car. Look at all that chrome. Beautiful!

[WABOOM]

Thanks!