|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-29-2014, 10:14 PM | #21 |
Senior Member
Join Date: May 2010
Location: Larry Young, Tulsa, OK
Posts: 202
|
Re: Question on engine parts interchangeability
The cam bearings I ordered were standard size (both times). The rings I ordered were for 0.030 over 3 3/16. Filing rings to fit is not uncommon in an engine assembly, but I've never been told not to do it.
|
10-30-2014, 02:46 PM | #22 | |
Senior Member
Join Date: May 2010
Location: Larry Young, Tulsa, OK
Posts: 202
|
Re: Question on engine parts interchangeability
Quote:
After looking further I believe the oil rings were 3/16 in the 8BA, but 5/32 in the 59AB. The rings I bought clearly state for 39-48 in the catalog, but apparently I got later ones anyway. It looks like the parts supplier sabotaged me with both the rings and cam bearings. Could my piston grooves be machined to 3/16" width? I still don't know why moly rings cannot be filed to correct the end gap. I don't believe I have the "green bible". I have 39-48 Service Manual and probably a dozen other books and manuals. I haven't run across the difference in rings. I guess this is one way to learn. |
|
Sponsored Links (Register now to hide all advertisements) |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|