United Pacific Woodgrained Repro Dash

[Bondolero]

Could someone please comment on the woodgrain finish on these dashes that has actually laid hands on one. I know the fit is good.
My original dash has holes cut in it I want to eliminate and fill but I will not pay $1000 plus to re wood grain it. This appears to be a solution to return my dash to its original smooth appearance without radio, ac control, mounted in it.
It is far enough away from the mouldings, I can live with any difference in graining/color.

thank you

[TonyM]

I think this guy does vintage Ford woodgrain.


https://www.fordbarn.com/forum/member.php?u=8835




Felix37

[mrtexas]

Have it hydro wood grained. Much cheaper than hand done and looks like factory.

[Bondolero]

thats where i got the $1000 figure. "Grain it " is $1200

UP new dash is $420

[fjz]

I woodgrained my dash by gluing walnut veneer, 1" edging strips, to the metal with contact cement. Took time but cost me less than $20. You could fill the unwanted holes beforehand.

[DavidG]

Sponsored Links (Register now to hide all advertisements)

Judging from the photo in their online catalogue, the base coat appears to be a good replica of the original. One might quibble with the burl pattern compared to the original, but the average bear would not know the difference.


Shown below are some original examples (you have to discount for brighter ambient lighting and greater UV deterioration in the example on the right).

[Bondolero]

thank you David, I am sure it would satisfy me and would certainly look better than it does now with a 90's radio hanging out of it on one side.
Got one of the new dash panels that holds five gauges and fits in the original hole. Very nice quality.
Larry

[35fordtn]

I stock the United Pacific woodgrained dashes and must say they look very good. I can post some real life photos on here tomorrow if you like

[alandomer]

I'm interested. Looking forward to seeing the pics.

[Bondolero]

Yes me too, I can use one of those and hang my original on the garage wall.
They sure look to be pretty nice.
thanks

[deuce lover]

Here is his auction with a pic of the dash.

https://www.ebay.com/itm/NEW-1932-Fo...MAAOSwEzxYRedM

[wexford]

Here are some woodgraining photos of different types of grains, if you are interested or have any questions private message me and i would love to answer any of your questions thanks

[35fordtn]

Sorry I forgot to attach some "real life" photos


IMG_6076.jpg

IMG_6075.jpg

IMG_6074.jpg

IMG_6072.jpg

IMG_6071.JPG

[wexford]

The United Pacific Woodgrained Repro Dash looks great, if you have a 32 and your looking for a dash that is woodgrained the united dash would be a great dash to buy, its a great price for a steal dash with woodgrain finish on it, summit, and speedway have them for $ 404.99, thats a really good deal , i would say the woodgrain finish on it is hydrographics, if i had to guess i bet julianos is doing the hydrographics woodgraining on the dashes

[RB]

I was following this thread with great interest & was curious to know if anyone can duplicate the wood grain on the repo dash should a person want to grain the garnish mouldings as well.

[1931 flamingo]

Most likely Juliano's and I thought Honest Charlie's was doing the same way.
Paul in CT

[wexford]

Originally Posted by RB

I was following this thread with great interest & was curious to know if anyone can duplicate the wood graihould a person want to grain the garnish mouldings as well.

n on the repo dash s

Originally Posted by 1931 flamingo

Most likely Juliano's and I thought Honest Charlie's was doing the same way.
Paul in CT

if it was me i would match the garnish moldings with the same grain that is on the United Pacific Woodgrained Repro Dash, i have looked at the United Pacific Woodgrained Repro Dash, then i went to the julianos web page and looked at the samples of the hydrographics woodgraing the grain thats on the United Pacific Woodgrained Repro Dash it looks like to me the Metallic Brazilian Burlwood, i think honest charlie uses the original style plate and roller system

[Big Shark]

got mine hydrodipped. Was included with my paint job.

[wexford]

Originally Posted by Big Shark

got mine hydrodipped. Was included with my paint job.

Great looking 37 dash, is that a walnut finish

[Gary-UK]

These two were hydro dipped here in England.