Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 12-06-2019, 10:54 AM   #1
Mr. Will
Senior Member
 
Mr. Will's Avatar
 
Join Date: Sep 2013
Location: East Fork Satsop
Posts: 611
Default 1933-1936 Rear End Widths

Can anyone tell me what the overall width is, bolt flange to bolt flange, on 33-34 and also 35-36 rear banjo rear ends? Any input would be appreciated.



Thanks Dan
Mr. Will is offline   Reply With Quote
Old 12-06-2019, 02:24 PM   #2
Mr. Will
Senior Member
 
Mr. Will's Avatar
 
Join Date: Sep 2013
Location: East Fork Satsop
Posts: 611
Default Re: 1933-1936 Rear End Widths

I found it.
1928-1931 57.0″ Spring Mount Eye to Eye 49.5″

1932-1934 57.75″ --------------------------- 47.5″

1935-1936 59.5″ ----------------------------48.25″

1937-1941 59.5″ -----------------------------48.5″

1942-1948 61.0″
Mr. Will is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 12-06-2019, 06:53 PM   #3
JSeery
Member Emeritus
 
JSeery's Avatar
 
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
Default Re: 1933-1936 Rear End Widths

Some information here.
Attached Images
File Type: jpg axle1.jpg (62.2 KB, 46 views)
File Type: jpg axle2.jpg (54.5 KB, 247 views)
File Type: jpg axle3.jpg (49.2 KB, 239 views)
File Type: jpg axle4.jpg (48.4 KB, 231 views)
JSeery is offline   Reply With Quote
Old 12-07-2019, 12:13 AM   #4
cas3
Senior Member
 
Join Date: Jan 2011
Location: sw minnesota
Posts: 4,541
Default Re: 1933-1936 Rear End Widths

thats a good article posted by jseery, every jalopy builder should have it bookmarked. mr will you havnt given us a clue what you are building yet, but on my 34 coupe i went for the 35 to 41 housing width. several reasons, its a little stronger, parts are more common, the 3/4" per side wider works out well with my 750x16's on the rear. my car is a kids jalopy from the 50's, not a restoration. a work in progress i think they call it! happy motoring, skip
Attached Images
File Type: jpg IMG_0483.JPG (149.7 KB, 22 views)
cas3 is offline   Reply With Quote
Old 12-07-2019, 12:27 AM   #5
Mr. Will
Senior Member
 
Mr. Will's Avatar
 
Join Date: Sep 2013
Location: East Fork Satsop
Posts: 611
Default Re: 1933-1936 Rear End Widths

Quote:
Originally Posted by JSeery View Post
Some information here.
Thanks for the article, will save it in my database.
Mr. Will is offline   Reply With Quote
Old 12-07-2019, 12:38 AM   #6
Mr. Will
Senior Member
 
Mr. Will's Avatar
 
Join Date: Sep 2013
Location: East Fork Satsop
Posts: 611
Default Re: 1933-1936 Rear End Widths

Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by cas3 View Post
thats a good article posted by jseery, every jalopy builder should have it bookmarked. mr will you havnt given us a clue what you are building yet, but on my 34 coupe i went for the 35 to 41 housing width. several reasons, its a little stronger, parts are more common, the 3/4" per side wider works out well with my 750x16's on the rear. my car is a kids jalopy from the 50's, not a restoration. a work in progress i think they call it! happy motoring, skip
I have a 33 coupe and also have a 36 banjo I want to use. I was concerned with the width of the later rear and fender clearance should I decided to run fenders.
I know I can make up the difference with wheel offset just wanted to verify before i ventured there.
Your coupe looks great.

Thanks Dan
Mr. Will is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 12:42 PM.