|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-30-2013, 12:04 PM | #1 |
Senior Member
Join Date: May 2010
Posts: 2,871
|
H&C Ignition, distributor cap
Does someone have a photo or dimensions of the correct crab type dist cap to fit the H&C Ignition. I understand they are deeper than the stock cap, If you use the stock Ford cap, the rotor will hit, and possible break it. Also, are the rotors out there somewhere, either NOS, used or repopped ? Thanks Fordbarners.
|
09-30-2013, 12:53 PM | #2 |
Senior Member
Join Date: May 2010
Location: middle of Iowa
Posts: 647
|
Re: H&C Ignition, distributor cap
The only difference is the hump from the center button to the coil socket is on the outside, rather than the inside. I hear Bob Drake had made them, but haven't looked in his catalogs.
|
Sponsored Links (Register now to hide all advertisements) |
|
09-30-2013, 12:56 PM | #3 |
Senior Member
Join Date: May 2010
Location: SPEEDWAY INDIANA
Posts: 4,148
|
Re: H&C Ignition, distributor cap
The Bob Drake nose style cap seems to fit very well...
|
09-30-2013, 01:04 PM | #4 |
Senior Member
Join Date: May 2010
Location: Encino California, near Burbank
Posts: 935
|
Re: H&C Ignition, distributor cap
The Drake cap has been on back order since June, at least for me. Drake has an odd way for the record of orders to disappear from the computer, strangely if the original order was a free shipping. The subsequent order could be treated as a new order. Waiting for mine to proceed with my HC crab. I should check with them again. Good Luck: Fred A
|
09-30-2013, 01:17 PM | #5 |
Senior Member
Join Date: May 2010
Location: Central Coast, Calif.
Posts: 839
|
Re: H&C Ignition, distributor cap
|
09-30-2013, 06:54 PM | #6 |
Senior Member
Join Date: May 2010
Posts: 2,871
|
Re: H&C Ignition, distributor cap
Sponsored Links (Register now to hide all advertisements)
|
10-01-2013, 11:01 AM | #7 |
Senior Member
Join Date: May 2010
Location: middle of Iowa
Posts: 647
|
Re: H&C Ignition, distributor cap
|
10-01-2013, 11:34 AM | #8 |
Senior Member
Join Date: May 2010
Location: Near Rising Sun, Maryland
Posts: 10,858
|
Re: H&C Ignition, distributor cap
The NEW Drake crab caps will work on the stock crab distributors as well as the HC dual point, dual coil distributors. I have posted this here many times in the past year. This is not just hearsay, I have two of these new Drake caps and they do not have the inner molded hump that typically breaks the HC rotors, as the old crab caps would. I have not been able to find a good source for rotors new (NOS) or used at a realistic price.
*Edit: If you use the NEW Drake cap you must remember that the cylinder marking numbers are different than an HC cap, so you will need to remark some of the numbers on the Drake cap and wire it exactly like the original HC cap numbers. Also, if you do a search for "Harmon Collins" you will find a lot of this information already posted with pictures.
__________________
John "Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein Last edited by JM 35 Sedan; 10-01-2013 at 12:17 PM. |
10-01-2013, 01:24 PM | #9 |
Senior Member
Join Date: May 2010
Location: NJ
Posts: 6,178
|
Re: H&C Ignition, distributor cap
So you need one without the bump inside, right?
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|