|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-02-2018, 10:24 AM | #1 |
Junior Member
Join Date: Oct 2018
Location: Georgia
Posts: 1
|
Coupe Center Crossmember Replacement
I need to replace the damaged center crossmember in my '30 Coupe. To do this I see that the eight rivets on each end must be removed. Is there a way to remove the rivets on the back side of the crossmember without lifting the body? Any suggestions that could help make this job a bit easier?
This car will be a basically stock driver and not a show car. But I have far too many suggestions that I just hotrod it because it has such a nice body... |
10-02-2018, 07:39 PM | #2 |
BANNED
Join Date: May 2010
Location: Walla Walla, Washington USA
Posts: 6,066
|
Re: Coupe Center Crossmember Replacement
To make it real easy...remove the body and do it right!
Pluck |
Sponsored Links (Register now to hide all advertisements) |
|
10-03-2018, 02:22 AM | #3 |
Senior Member
Join Date: May 2010
Location: Southern California
Posts: 7,032
|
Re: Coupe Center Crossmember Replacement
Sponsored Links (Register now to hide all advertisements)
Charlie Stephens |
|
|
Sponsored Links (Register now to hide all advertisements) |
|