|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-25-2019, 03:09 PM | #1 |
Junior Member
Join Date: Jun 2019
Posts: 1
|
Need help with Ford model 8ba carburetor
I have a 1951 car with a flathead v8 that I am trying to put back on the road. I bought a carb kit from Shoebox Central for the Ford 8ba carb that is on it. The kit instructions show a accelerator pump discharge needle in the carb but my carb is missing it and the kit does not have a replacement for it. I have another car for parts and the 8ba on it is also missing the discharge needle. Should there be a needle in this carb? Apparently both cars had been running without it. If it is needed where can they be purchased? MY DILEMMA HAS BEEN RESOLVED. THANKS FOR EVERYONES HELP!
Last edited by Confused; 07-22-2019 at 06:14 PM. Reason: Question has been answered. |
06-25-2019, 03:49 PM | #2 |
Senior Member
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,303
|
Re: Need help with Ford model 8ba carburetor
Get hold of "Charlie ny" on here. He's the resident carb guru on the board, and I'm sure he can help you out, whether it's parts, advice, or a complete rebuild.
|
Sponsored Links (Register now to hide all advertisements) |
|
06-25-2019, 05:01 PM | #3 |
Senior Member
Join Date: May 2010
Location: Shippensburg, pa.
Posts: 415
|
Re: Need help with Ford model 8ba carburetor
X 2 for Charley ny
|
06-25-2019, 05:34 PM | #4 |
Senior Member
Join Date: May 2010
Location: Santee, California
Posts: 3,505
|
Re: Need help with Ford model 8ba carburetor
The discharge needle is not a needle per say, but the squirters, through which the accelerator pump injects the gas into the venturi. This prevents a stumble when the throttle plates first open.
Ahhhhh I think? Of this I am sure, you won't find it in any kit, it's not a rebuild part. Returned after doing some homework: there is a pump discharge needle, that sits below the pump discharge nozzel (squirters ). Looks to be for preventing a rich mixture or flooding in rough terrain.Prevents fuel entering the venturi when the accelerator pump is not in a stroke or pump condition. I can see how a car would run without it. Last edited by Russ/40; 06-25-2019 at 06:24 PM. |
06-25-2019, 09:50 PM | #5 |
Senior Member
Join Date: May 2017
Location: Arkansas
Posts: 611
|
Re: Need help with Ford model 8ba carburetor
|
06-25-2019, 09:57 PM | #6 |
Senior Member
Join Date: May 2010
Location: Oshkosh, Wi
Posts: 4,526
|
Re: Need help with Ford model 8ba carburetor
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|