The Ford Barn

hotrodalley · 08-12-2013, 11:42 PM

I need a pair of window frames for a 68B Cabriolet.

Does anybody know if these are being reproduced?

If nobody is reproducing these perhaps there are drawings somewhere that I could get the dimensions of the channel section.

PO51 · 08-13-2013, 12:17 AM

Several years ago I asked the same question on this site, as it turns out someone was having several sets made, I ordered a pair, have yet to install them as the Cabby is #4 on my list of projects, the ones I got were bare steel and need to be chromed, I wish I had the name of the guy I got them from. Ray from laMesa who post her often may be able to help.

Greg Jones · 08-13-2013, 02:09 PM

Larry Mahacek has some steel for this purpose, you have to cut it, fit it, and get it plated.

936-441-8209

[email protected]

Bill Underwood · 08-13-2013, 05:56 PM

Sponsored Links (Register now to hide all advertisements)

We're getting close! How quickly do you need them. May have just the surrounds by the end of the year. Working on stainless Can likely provide 18 ga mild steel in 25" sticks.
You would have to miter and weld. Not cheap lots of time in r&d and materials on protos on these.
Pms only or email to [email protected]

08-12-2013, 11:42 PM	#1
hotrodalley Senior Member Join Date: Nov 2010 Location: Franklin, TN Posts: 124	Help on cabriolet window frames I need a pair of window frames for a 68B Cabriolet. Does anybody know if these are being reproduced? If nobody is reproducing these perhaps there are drawings somewhere that I could get the dimensions of the channel section.

08-13-2013, 12:17 AM	#2
PO51 Senior Member Join Date: May 2010 Location: Upland Ca Posts: 274	Re: Help on cabriolet window frames Several years ago I asked the same question on this site, as it turns out someone was having several sets made, I ordered a pair, have yet to install them as the Cabby is #4 on my list of projects, the ones I got were bare steel and need to be chromed, I wish I had the name of the guy I got them from. Ray from laMesa who post her often may be able to help.

08-13-2013, 02:09 PM	#3
Greg Jones Senior Member Join Date: Jul 2010 Location: Aiken, South Carolina Posts: 695	Re: Help on cabriolet window frames Larry Mahacek has some steel for this purpose, you have to cut it, fit it, and get it plated. 936-441-8209 [email protected]

08-13-2013, 05:56 PM	#4
Bill Underwood Senior Member Join Date: May 2010 Location: Tennessee Posts: 445	Re: Help on cabriolet window frames Sponsored Links (Register now to hide all advertisements) We're getting close! How quickly do you need them. May have just the surrounds by the end of the year. Working on stainless Can likely provide 18 ga mild steel in 25" sticks. You would have to miter and weld. Not cheap lots of time in r&d and materials on protos on these. Pms only or email to [email protected]