The Ford Barn

John Kennedy · 04-14-2012, 08:59 PM

Hey guys, I'm hoping someone out here has body dimensions for my 29 Tudor Sedan. Body is all stock, no wood involved.

I'm particularly interested in left-right measurements above the roof edges and getting my door alignments right. My right side front-roof area is splayed out some, windshield area seems fine.

Any suggestions? Thanks!

John

John Kennedy · 04-15-2012, 08:52 PM

Anybody? I assume the front upper roof edges are parallel ahead of the doors? Or do they taper inwards some?

4dFord/SC · 04-15-2012, 09:04 PM

You might have better luck on the Model A Forum.

T&A Flathead · 04-15-2012, 09:11 PM

I have a 29 tudor that i can measure, but i don't really understand what you need.

Tudortomnz · 04-16-2012, 01:33 AM

I also have one that I will measure if you explain exactly what you require.

John Kennedy · 04-16-2012, 08:04 AM

Sponsored Links (Register now to hide all advertisements)

I just want to verify that the front roof pieces remain parallel along the roof edge, as opposed to tapering inwards. Is it a straight shot from the doors forward?

merc40 · 04-16-2012, 09:04 AM

on my 31 2 dr. they taper down to where meet the top of the door. reguards dick t.

John Kennedy · 04-16-2012, 07:31 PM

OK, that's what I did too. Everything else seems right on so far! Now I just gotta get past my surgery and get back on things!

Tudortomnz · 04-17-2012, 01:46 AM

The outer edge tapers towards the front pillar, exactly as the top edge of the door does.

Mart · 04-17-2012, 03:12 AM

If you think the one side looks all right, you can string a center line down the center and make the bad side match the good side.

Mart.

04-14-2012, 08:59 PM	#1
John Kennedy Senior Member Join Date: May 2010 Location: Tucson Arizona Posts: 301	Need 29 Sedan measurements please Hey guys, I'm hoping someone out here has body dimensions for my 29 Tudor Sedan. Body is all stock, no wood involved. I'm particularly interested in left-right measurements above the roof edges and getting my door alignments right. My right side front-roof area is splayed out some, windshield area seems fine. Any suggestions? Thanks! John __________________ Building a 29 Sedan on 32 chassis........ very slowly....

04-15-2012, 08:52 PM	#2
John Kennedy Senior Member Join Date: May 2010 Location: Tucson Arizona Posts: 301	Re: Need 29 Sedan measurements please Anybody? I assume the front upper roof edges are parallel ahead of the doors? Or do they taper inwards some? __________________ Building a 29 Sedan on 32 chassis........ very slowly....

04-15-2012, 09:04 PM	#3
4dFord/SC Senior Member Join Date: May 2010 Location: Columbia, SC Posts: 1,579	Re: Need 29 Sedan measurements please You might have better luck on the Model A Forum.

04-15-2012, 09:11 PM	#4
T&A Flathead Member Join Date: Jul 2011 Location: Pewaukee, WI (Milwaukee) Posts: 50	Re: Need 29 Sedan measurements please I have a 29 tudor that i can measure, but i don't really understand what you need.

04-16-2012, 01:33 AM	#5
Tudortomnz Senior Member Join Date: May 2010 Location: Canterbury, New Zealand Posts: 1,242	Re: Need 29 Sedan measurements please I also have one that I will measure if you explain exactly what you require.

04-16-2012, 08:04 AM	#6
John Kennedy Senior Member Join Date: May 2010 Location: Tucson Arizona Posts: 301	Re: Need 29 Sedan measurements please Sponsored Links (Register now to hide all advertisements) I just want to verify that the front roof pieces remain parallel along the roof edge, as opposed to tapering inwards. Is it a straight shot from the doors forward? __________________ Building a 29 Sedan on 32 chassis........ very slowly....

04-16-2012, 09:04 AM	#7
merc40 Member Join Date: May 2010 Location: grass valley ca. Posts: 75	Re: Need 29 Sedan measurements please on my 31 2 dr. they taper down to where meet the top of the door. reguards dick t.

04-16-2012, 07:31 PM	#8
John Kennedy Senior Member Join Date: May 2010 Location: Tucson Arizona Posts: 301	Re: Need 29 Sedan measurements please OK, that's what I did too. Everything else seems right on so far! Now I just gotta get past my surgery and get back on things! __________________ Building a 29 Sedan on 32 chassis........ very slowly....

04-17-2012, 01:46 AM	#9
Tudortomnz Senior Member Join Date: May 2010 Location: Canterbury, New Zealand Posts: 1,242	Re: Need 29 Sedan measurements please The outer edge tapers towards the front pillar, exactly as the top edge of the door does.

04-17-2012, 03:12 AM	#10
Mart Senior Member Join Date: May 2010 Location: Solihull, England. Posts: 8,752	Re: Need 29 Sedan measurements please If you think the one side looks all right, you can string a center line down the center and make the bad side match the good side. Mart.