The Ford Barn

Thriftmaster · 09-03-2010, 02:50 AM

I have a Stewart Warner 6 volt electric fuel pump. It is modeled after the Walbro pumps of the early days. The pump is marked model #2024 and the part number on the original box is 665- 235BD.
The original walbro unit was a WEP11 or 2102 and the diaphragm kit was part #300 714S. The pump works great but the diaphragm in side the pump has torn and started to leak fuel. I have so far been unsuccessful at locating any here in Canada.
Does anyone know where I can purchase any of these kits from so that I can get my ride back up and running? Any help would be greatly appreciated. Thanks in advance.

JIM, WI · 09-04-2010, 11:35 PM

There has been an ad in Hemmings Motor News for many years-
Send a SASE to Donald McKinsey
PO Box 94H
Wilkinson, IN 46186

He has the parts for those fuel pumps. They can not be used with ANY alcohol in the fuel or the bellows will turn to jelly. There are much better electric fuel pumps that will handle todays fuels.

chopnchaneled · 09-05-2010, 09:26 AM

Sponsored Links (Register now to hide all advertisements)

I have 2 complete pumps, new in the box, Stewart Warner
PT # 235B-D, 6 volt, 5 psi
If you don't have any luck with rebuild kits.

Joe

09-03-2010, 02:50 AM	#1
Thriftmaster Member Join Date: May 2010 Posts: 77	Need help locating elect. fuel pump parts City: vancouver State: Canada I have a Stewart Warner 6 volt electric fuel pump. It is modeled after the Walbro pumps of the early days. The pump is marked model #2024 and the part number on the original box is 665- 235BD. The original walbro unit was a WEP11 or 2102 and the diaphragm kit was part #300 714S. The pump works great but the diaphragm in side the pump has torn and started to leak fuel. I have so far been unsuccessful at locating any here in Canada. Does anyone know where I can purchase any of these kits from so that I can get my ride back up and running? Any help would be greatly appreciated. Thanks in advance.

09-04-2010, 11:35 PM	#2
JIM, WI Senior Member Join Date: May 2010 Posts: 114	Re: Need help locating elect. fuel pump parts There has been an ad in Hemmings Motor News for many years- Send a SASE to Donald McKinsey PO Box 94H Wilkinson, IN 46186 He has the parts for those fuel pumps. They can not be used with ANY alcohol in the fuel or the bellows will turn to jelly. There are much better electric fuel pumps that will handle todays fuels.

09-05-2010, 09:26 AM	#3
chopnchaneled Member Join Date: May 2010 Location: Buford,Ga. Posts: 87	Re: Need help locating elect. fuel pump parts Sponsored Links (Register now to hide all advertisements) I have 2 complete pumps, new in the box, Stewart Warner PT # 235B-D, 6 volt, 5 psi If you don't have any luck with rebuild kits. Joe