Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 07-03-2017, 03:16 PM   #1
wrndln
Senior Member
 
Join Date: May 2010
Location: Lakeville, MN
Posts: 4,550
Default Exterior handle ID

I have a handle that looks like it might be for a model A of some sort. I took some pictures of it. It has a black insert in the face of the handle. It looks a lot like an AA or CCPU door handle, but I have a CCPU handle and it is not the same as this one - close, but not the same. If anyone can ID it, I would appreciate it. I would like to ID it and sell it, but I don't know what it is used on.
Rusty Nelson
Attached Images
File Type: jpg Unknown exterior handle 1.JPG (34.3 KB, 24 views)
File Type: jpg Unknown exterior handle 2.JPG (68.1 KB, 17 views)
File Type: jpg Unknown exterior handle 3.JPG (40.4 KB, 19 views)

Last edited by wrndln; 07-03-2017 at 03:22 PM.
wrndln is offline   Reply With Quote
Old 07-03-2017, 03:24 PM   #2
J Franklin
Senior Member
 
J Franklin's Avatar
 
Join Date: May 2010
Location: oregon
Posts: 4,232
Default Re: Exterior handle ID

Model T Ford?
J Franklin is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 07-03-2017, 03:38 PM   #3
wrndln
Senior Member
 
Join Date: May 2010
Location: Lakeville, MN
Posts: 4,550
Default Re: Exterior handle ID

I don't know anything about model T's. I could post the information on the T forum and see if someone there knows what it is. There isn't much activity on the T forum, so I kind of doubt I would get any responses. I was hoping it was for a model A.
Rusty Nelson
wrndln is offline   Reply With Quote
Old 07-03-2017, 03:43 PM   #4
J Franklin
Senior Member
 
J Franklin's Avatar
 
Join Date: May 2010
Location: oregon
Posts: 4,232
Default Re: Exterior handle ID

Handles like that are used on Model A roadsters and phaetons according to my parts catalog.
J Franklin is offline   Reply With Quote
Old 07-03-2017, 03:46 PM   #5
SoCal_Alden
Member
 
SoCal_Alden's Avatar
 
Join Date: May 2010
Location: Carlsbad, CA
Posts: 67
Default Re: Exterior handle ID

Check the major suppliers - i.e. Snyders, Brattons, Berts, etc.
Very similar to the handles on my 29 CCPU.

Ford used this style handle on 26-27 Model T and 28-29 Model A CCPU's
Alden
SoCal_Alden is offline   Reply With Quote
Old 07-03-2017, 03:49 PM   #6
160B
Senior Member
 
160B's Avatar
 
Join Date: Aug 2010
Location: Port Orchard, WA
Posts: 1,448
Default Re: Exterior handle ID

1928, 1929 Model A Ford pickup outside door handle. The 1928, 1929 pickup doors were the same as the late Model T doors.
__________________
1931 160B & 1931 68B

If you don't have time to do it right the 1st time, how do you have time to do it the 2nd time?
160B is online now   Reply With Quote
Old 07-03-2017, 04:14 PM   #7
wrndln
Senior Member
 
Join Date: May 2010
Location: Lakeville, MN
Posts: 4,550
Default Re: Exterior handle ID

I am attaching are a couple pictures of what I have for my 29 CCPU. Note the ends are more squared off. Both handles have a black insert of some type, but the shapes are different.

J Franklin,
I agree the shape is like a roadster and phaeton, but they didn't have the black insert in the handle. I have some original handles for my 29 phaeton and they are the same shape, but no insert in the handles.
Rusty Nelson
Attached Images
File Type: jpg Truck handle maybe.jpg (64.2 KB, 17 views)
File Type: jpg Outside handle.jpg (76.3 KB, 20 views)
wrndln is offline   Reply With Quote
Old 07-03-2017, 07:23 PM   #8
JDupuis
Senior Member
 
JDupuis's Avatar
 
Join Date: Jan 2017
Location: Maryhill Ont Canada
Posts: 834
Default Re: Exterior handle ID

Just saw the same door handle on a 25 T Doctors coupe. Jeff
__________________
Let's let pylons, be pylons!
JDupuis is offline   Reply With Quote
Old 07-03-2017, 10:05 PM   #9
foxfire42
Senior Member
 
foxfire42's Avatar
 
Join Date: May 2010
Location: AZ and WA
Posts: 748
Default Re: Exterior handle ID

It looks like the first picture of handles in area 15 pg 12 of the JS&RG. The application is based on the shaft length. Pg 13 has a similar handle with the black insert but the ends are more square. The only difference is that handle has the black insert.
foxfire42 is offline   Reply With Quote
Old 07-03-2017, 11:13 PM   #10
wrndln
Senior Member
 
Join Date: May 2010
Location: Lakeville, MN
Posts: 4,550
Default Re: Exterior handle ID

The first picture in the JS's area 15 pg 12 is open car outside handles that DON'T have a black insert in them.
Rusty Nelson
wrndln is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 02:35 PM.