03-18-2021, 07:35 PM | #21 |
Senior Member
Join Date: May 2010
Posts: 426
|
Re: 3.54 vs 3.25
I am running a Max 1 cam in a 221 driving a 3.54 with 6.00 x 16 tires and the sweet spot is at 65mph. I am running in flat county and the acceleration is good.
|
03-18-2021, 08:10 PM | #22 |
Senior Member
Join Date: Jun 2014
Location: Williamsburg, VA
Posts: 1,627
|
Re: 3.54 vs 3.25
I changed the 3.78 for 3.25 gears in my '41 coupe with a 284 inch motor and Schneider 248f cam and Offy 425 heads. I love the quieter and more economical cruise and with the torque of that 4.125" stroke engine, no problem getting rolling, even on a steep incline. I bought a transmission case to build a 15/29 for lower gears, but I think that transmission case will stay under the work bench.
|
Sponsored Links (Register now to hide all advertisements) |
|
03-18-2021, 09:39 PM | #23 |
Senior Member
Join Date: May 2010
Location: upstate SC
Posts: 2,963
|
Re: 3.54 vs 3.25
I run 3:25 in my 41 truck with a 51 merc engine, only problem is starting off on a big hill, need to ride the clutch to get going which is tough on the clutch but do like the gear on a road trip-
|
03-18-2021, 09:48 PM | #24 |
Senior Member
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,316
|
Re: 3.54 vs 3.25
I have 3.55's in my '51 with a "warmed over" 255 ci Mercury. I find the car absolutely fine while driving around town, but I find myself trying to "grab another gear" on the highway. I plan on solving that by installing an overdrive transmission. I don't know their exact diameter, but I am running 2.25/75R15 rear tires. I believe that my '51 is about 300 lbs. heavier than a pre-war Ford.
|
03-19-2021, 12:13 AM | #25 |
Senior Member
Join Date: May 2010
Location: MN
Posts: 7,053
|
Re: 3.54 vs 3.25
I'd just setup to a 3:54 and see how it goes. Worked for years stock.
|
03-19-2021, 02:38 AM | #26 | |
Member
Join Date: Oct 2020
Location: Azalea, Oregon
Posts: 99
|
Re: 3.54 vs 3.25
Sponsored Links (Register now to hide all advertisements)
Quote:
Thanks. Wow, Practically a perfect match! I'll definitely go with the 3.25. thanks for the info!
__________________
Much improved since Henry sold it. |
|
03-19-2021, 02:46 AM | #27 |
Member
Join Date: Oct 2020
Location: Azalea, Oregon
Posts: 99
|
Re: 3.54 vs 3.25
Thanks to all for your responses, I was going back and forth but have decided on the 3.25. This forum is amazing!
__________________
Much improved since Henry sold it. |
03-19-2021, 06:26 AM | #28 |
Senior Member
Join Date: May 2010
Location: Illinois
Posts: 2,184
|
Re: 3.54 vs 3.25
I am very happy with 3.25s in my lighter roadster. I do have the low first and second. It has plenty of torque in 3rd ,which surprised me.Schneider 248F cam.
It sounds like your car would pull just fine . John
__________________
Welcome each day |
03-19-2021, 10:18 AM | #29 | |
Member
Join Date: Oct 2020
Location: Azalea, Oregon
Posts: 99
|
Re: 3.54 vs 3.25
Quote:
Thanks, from the specs I got from the prev. owner, my cam is the Schneider P-3/8.
__________________
Much improved since Henry sold it. |
|
04-24-2021, 11:39 AM | #30 |
Junior Member
Join Date: Apr 2021
Location: Searcy, AR
Posts: 3
|
Re: 3.54 vs 3.25
Put an overdrive in it like a 700r
|
04-24-2021, 12:40 PM | #31 |
Senior Member
Join Date: Jul 2010
Location: Ventura, CA
Posts: 2,464
|
Re: 3.54 vs 3.25
I have to second, well almost, the above suggestion. A built 2004R would work better with the 3.78 ratio. The 2004R is basically the same size as a TH350. An overdrive, be it a Columbia or an AOD, or a 5 spd T-5 is the better way to go.. My '36 has a well built 59AB with a 47-48 Columbia w/3.78 gears. the car runs very well on the street and/or highway. In my younger years I use to street race the car on a regular basis, very seldom got beat even against the stock tri-five Chevy's in the '50's. I have 3.26 gears in my '39, however the engine is a 330 hp 350 w/700R4, the car is a rocket ship. Apples and banana's...
__________________
Bill.... 36 5 win cpe |
04-25-2021, 11:03 AM | #32 |
Member
Join Date: Oct 2020
Location: Azalea, Oregon
Posts: 99
|
Re: 3.54 vs 3.25
Actually, changing gear ratios is my only option. I want to keep it simple and keep the stock rear end and xmission. Have pretty much decided on the 3.54 as most of my driving is on back roads and surface streets (except for some interstate driving to get off this mountain).
__________________
Much improved since Henry sold it. |
04-25-2021, 11:28 AM | #33 |
Senior Member
Join Date: Jul 2010
Location: Ventura, CA
Posts: 2,464
|
Re: 3.54 vs 3.25
To recap what I said earlier about installing an OD in lieu of trying to find a gear ratio that works under multiple conditions.
A late model Columbia, 46-48 will bolt right up to your stock 3.78 center section. The 46-48 Columbia's have electric over vacuum shifting which is very user friendly. The 46-48 Columbia's are very strong compared to the 36-41 units, they do need a few modifications and are a little spendy, but when you take into consider the benefits of not having to modify the car and the flexibility of the multiple gears, the benefits are huge. I have driven my '36 over 94k in the 68 years I have owned the car, never had any problems with the Columbia, blew out several transmissions street racing, due to missed speed shifting.
__________________
Bill.... 36 5 win cpe |
04-25-2021, 11:30 AM | #34 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,942
|
Re: 3.54 vs 3.25
As a side note, it's intersting to note that:
"The maximum speed was 35 MPH until 1940 and was 50 MPH from 1941 until 1958 (excepting the national 35 MPH limit of World War 2). In California [Chartrain 2005], the maximum speed was 45 MPH from 1931 until 1941. In 1941 it was raised to 55 MPH." |
04-25-2021, 02:49 PM | #35 | |
Member
Join Date: Oct 2020
Location: Azalea, Oregon
Posts: 99
|
Re: 3.54 vs 3.25
Quote:
Yes and that's what my car was designed for.. the 1939 suspension, steering, etc is most comfortable at speeds under 55 mph, and so am I (in this car). The 3 speed & stock rear end is all I want. I bought the car more for nostalgia than anything else. My first car was a 40 Merc (1958-60) and this one takes me back there every time I drive it. But thanks for the comments & advice.
__________________
Much improved since Henry sold it. |
|
04-25-2021, 08:44 PM | #36 | |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: 3.54 vs 3.25
Quote:
Last edited by JSeery; 04-25-2021 at 09:02 PM. |
|
04-26-2021, 03:41 AM | #37 |
Senior Member
|
Re: 3.54 vs 3.25
My friend has a 40 Ford 2 door sdn. and he put 325 in it and they are super great. We live in hilly country and no problem. I wish I had put them in my 35 Ford pickup. No problem taking off. I was surprise how nice they are.
|
04-26-2021, 07:48 AM | #38 | |
Senior Member
Join Date: Feb 2013
Location: Pittsford NY. USA
Posts: 1,096
|
Re: 3.54 vs 3.25
Quote:
I was thinking of putting 3.50's in my '37 w/stock 85 hp., 24 stud engine, w/27" tall tires. Now, I am thinking that 3.25's might be better. Hmm........
__________________
1952 Ford F1 1965 Ford Falcon Sprint 2007 Ford Mustang GT |
|
04-26-2021, 09:44 AM | #39 | |
Member
Join Date: Oct 2020
Location: Azalea, Oregon
Posts: 99
|
Re: 3.54 vs 3.25
Quote:
OK, so now you got me looking at the 3.25 again.. I've been bouncing between that & the 3.54.. Maybe by the time I'm ready (any time now) I'll be able to make up my mind. Going over the rpm/mph chart for both, I think 3.25 would be just right. Thanks.
__________________
Much improved since Henry sold it. |
|
04-26-2021, 12:25 PM | #40 |
Senior Member
Join Date: Aug 2010
Location: McMinnville, TN
Posts: 2,327
|
Re: 3.54 vs 3.25
I have the 3.25 and the 15/29 transmission gears in my 36 and so far I LOVE it..
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|