Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 02-10-2019, 04:28 PM   #1
Concept Cars
Junior Member
Join Date: Apr 2011
Posts: 12
Default 32 Roadster tack rail fit & dimensions

I'm restoring an original '32 roadster body where a previous owner welded metal over the areas where the wood tack strip was, including welding to the quarter panels. I was able to clean up most of the areas and return them to stock, except the corners, I can't find the edge where the newer metal met the original metal or understand if some of the original metal was cut. My goal is to return these areas to stock/original configurations.
1.) Could someone share the measurement from the door opening edge, along the top of the quarter panel to the place where the wood tack strip begins?
2.) Can anyone post some pictures of the intersection of the wood tack strip and the quarter panel so I can see how it was originally shaped?
Thank you!
Concept Cars is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)

All times are GMT -5. The time now is 01:32 AM.