|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-28-2019, 05:00 PM | #1 |
Senior Member
Join Date: May 2010
Location: Daytona Beach, Fl & Spencer, W. Va,
Posts: 4,442
|
Model A Steering Gear/Column Weirdness and Question
This past spring, I gathered up the remaining parts dad had stashed in Florida, and brought them back up here to WV. One item is what looks to be a new steering gear/column. I'm not familiar with these, and when I was pulling it from the rafters and lowering it down to the floor, under it's weight (and me swinging it around) the black column pulled part way out of the red primer casting. It didn't want to slide right back in, so I didn't force it... until I could ask you guys about it. (you can see it in the pics) I'll eventually be selling it. Can you guys help me with what I have, and am dealing with here? I'm limited in my 'A' knowledge. Thanks!
__________________
Mike Jr. here. I get on here every few months to check messages, and look through his almost 500 saved messages for information on the '29 and '34 I still have. A lot of very nice people on here. He truly enjoyed Ford Barn. |
07-28-2019, 05:23 PM | #2 |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,513
|
Re: Model A Steering Gear/Column Weirdness and Question
Sponsored Links (Register now to hide all advertisements)
Your Dad was respected and is missed here. |
Sponsored Links (Register now to hide all advertisements) |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|