Go Back   The Ford Barn > The Archives > Early V8

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Old 03-30-2005, 02:52 PM   #1
Guest
 
Posts: n/a
Default Motor mount help




I finally got rid of the old water pumps and got 2 new pumps from speedway. Problem...now I can't get the rubber motor mount back under the pump. I have only replaced the passenger side pump so far. I have tried using a floor jack under the front corner and also tried using a pry bar to lift the front of the engine up. What is the trick? Thanks in advance.





 
Old 03-30-2005, 02:59 PM   #2
Guest
 
Posts: n/a
Default Re: Motor mount help

Sponsored Links (Register now to hide all advertisements)






Al, I always use my floor jack, one side at a time, I stand a 2x4 on top of the jack, staight up, and let the 2x4 rest under the exhaust manifold. Slowly jack the engine up just enough for the mount to go into its place. This has always worked for me. Good luck, Tom





 
Sponsored Links (Register now to hide all advertisements)
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 06:59 AM.