Go Back   The Ford Barn > The Swap Meet > For Sale > Early V8

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 10-28-2020, 02:07 PM   #1
Andy
Senior Member
 
Join Date: May 2010
Location: Kerrville, Tx
Posts: 2,468
Default 32 V8 engine short block

City: Kerrville
State: Texas
Price: $1000

Clean no crack, no rust 32 short block. Bored .030 recently, no ridge.
Andy is online now   Reply With Quote
Old 11-11-2020, 11:59 AM   #2
Andy
Senior Member
 
Join Date: May 2010
Location: Kerrville, Tx
Posts: 2,468
Default Re: 32 V8 engine short block

Sponsored Links (Register now to hide all advertisements)
It was apparently rebuilt not long before being removed from service.
I took it apart for checking and freshing it up. I have not taken the crank out. The cylinders show no wear. The valves and seats are fine. The cam and crank are later. I believe a fresh set of rings would be all it needs. It has the press on timing gear that should be replaced also. I started removing the rings as that was what I intended to do. It was in a hot rod as it is paintd red and has been relieved. The owner had a famous California gold full fendered roadster and I think this is engine may have came from that car.
It is very clean and undamaged.
Correct 32 V8 engine with the straight down water cocks.

Last edited by Andy; 11-11-2020 at 12:05 PM.
Andy is online now   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 01:50 PM.