|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-03-2019, 11:46 PM | #1 |
Senior Member
Join Date: May 2010
Location: Portland, Oregon
Posts: 173
|
33-34 Pickup Radiator Elevation
Guys,
I'm putting back together the front end on my 33 pickup and need to know the exact elevation of the radiator feet supports in relationship to the bottom of the frame so that I can weld in new supports. I have the front to back figured out using the hood and grille shell. If someone that has a 33 or 34 pickup could take a look that would be great. Also, the hood doesn't seem to want to fold up more than about 45 degrees from horizontal. Should the hood fold up past 90 degrees and lay over onto the opposite side? If so mine is bound up pretty bad. Thanks much, Peder |
07-04-2019, 05:34 AM | #2 |
Senior Member
Join Date: May 2010
Location: Southern France
Posts: 5,279
|
Re: 33-34 Pickup Radiator Elevation
|
Sponsored Links (Register now to hide all advertisements) |
|
07-04-2019, 07:55 AM | #3 |
Senior Member
Join Date: May 2010
Location: Huntsville Al
Posts: 1,526
|
Re: 33-34 Pickup Radiator Elevation
Yes, the hood should fold up and lay down against the opposite side. Take the rod out of the hinge and clean and oil it good.
__________________
Matt 24:36-41 |
07-04-2019, 03:10 PM | #4 |
Senior Member
Join Date: May 2010
Location: Portland, Oregon
Posts: 173
|
Re: 33-34 Pickup Radiator Elevation
Sponsored Links (Register now to hide all advertisements)
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|