|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-28-2017, 11:06 PM | #1 |
Member
Join Date: Dec 2010
Location: Toronto , Ontario
Posts: 86
|
46 - 48 bumper wing tips
Found these bumper wing tips. Are they Ford , Mercury or both?
|
05-28-2017, 11:47 PM | #2 |
Senior Member
Join Date: May 2012
Location: Queensland, Australia
Posts: 10,361
|
Re: 46 - 48 bumper wing tips
These Bumper Tips are for 46 - 48 Mercury only. While the 3 grooves at top of the Mercury Bumper Guards were removed on the updated 47 and 48 models for a smooth look, these End Tips retained the 3 grooves on all years. Regards Mercman <><
|
Sponsored Links (Register now to hide all advertisements) |
|
05-28-2017, 11:57 PM | #3 |
Senior Member
Join Date: May 2012
Location: Queensland, Australia
Posts: 10,361
|
Re: 46 - 48 bumper wing tips
This is the correct Bumper End Tip for the 46-48 Fords. it is totally different from the ones fitted on the same years of Mercury. |
05-29-2017, 08:26 AM | #4 |
Member
Join Date: Dec 2010
Location: Toronto , Ontario
Posts: 86
|
Re: 46 - 48 bumper wing tips
Thanks Mercman ,
The contour looked like they would bolt onto the Ford bumper okay. The proper Ford tips are very different ..... wonder how hard they are to find. Regards ... Flathead47 |
05-29-2017, 12:14 PM | #5 |
Senior Member
Join Date: Jan 2011
Location: Albion, PA
Posts: 708
|
Re: 46 - 48 bumper wing tips
They are on Ebay from time to time. Over a couple of years I found all four for my 48 business coupe.
|
05-29-2017, 05:39 PM | #6 |
Senior Member
Join Date: May 2012
Location: Queensland, Australia
Posts: 10,361
|
Re: 46 - 48 bumper wing tips
Sponsored Links (Register now to hide all advertisements)
Here are two photos showing the Bumper Guards on the Mercury. You will note that in 1946, they had three little slots. These were deleted in the updated 47 models that were sold into 1948. However, the Bumper End Tips retained these shots for all years. |
05-29-2017, 05:50 PM | #7 |
Senior Member
Join Date: May 2012
Location: Queensland, Australia
Posts: 10,361
|
Re: 46 - 48 bumper wing tips
The reason why the Mercury End Tips don't fit the Ford Bumpers, is because the Mercury Bumpers have a ridge down the bottom, as shown in this photo. The Ford Bumpers are plain, without this ridge. |
05-29-2017, 06:20 PM | #8 |
Senior Member
Join Date: May 2010
Posts: 893
|
Re: 46 - 48 bumper wing tips
I think there are some ford wing tips on the Dearborn auction ending this Thursday. Graffe auction site
|
05-30-2017, 09:02 AM | #9 |
Senior Member
Join Date: Jun 2012
Location: Long Island,NY
Posts: 1,554
|
Re: 46 - 48 bumper wing tips
I have found that sometimes people tend to over "accessorize" their cars. I have a set of wing tips for my '46 Station Wagon, but took them off. I think they make the front end too bulky and look like an add on. I like the look of the stock bumper as it fits the overall look of the front end.
|
05-30-2017, 08:35 PM | #10 |
Senior Member
Join Date: May 2010
Location: ontario,Canada
Posts: 450
|
Re: 46 - 48 bumper wing tips
Hi, did you want to sell them? Moe
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|