|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-13-2020, 04:40 PM | #1 |
Senior Member
Join Date: May 2010
Posts: 500
|
What do these fender skirts fit?
My computer adverse friend bought these fender skirts at an estate sale for Ford parts (mostly 1936 which he wants). I knew these were no where near Ford skirts but what were they for? They are 39 inches long, 18 inches tall, and have a 39 inch sculpture on the bottom. They have a locking tab for the top and two sliding tabs on the bottom which may go into the 1/4 inch holes at each end. Any ideas?
|
06-13-2020, 08:13 PM | #2 |
Senior Member
Join Date: May 2010
Location: East Hartford, Ct
Posts: 5,898
|
Re: What do these fender skirts fit?
They are aftermarket skirts that are not brand specific and will fit most 30's to 40's vehicles with a tear drop shaped fender whether it be Ford,GM or MOPAR
The holes drilled in them were done that way because the original mounting hardware is broken or missing and were cobbled up using bolts to mount them.
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES Last edited by 51 MERC-CT; 06-14-2020 at 12:25 PM. |
Sponsored Links (Register now to hide all advertisements) |
|
06-14-2020, 07:42 PM | #3 |
Senior Member
Join Date: Apr 2017
Location: Texas Gulf Coast
Posts: 727
|
Re: What do these fender skirts fit?
I agree with 51 Merc, they look like a set I had on a 48 Conv. but no holes. There were clips inside of fenders that they clipped into and lever on bottom of skirt locked the top in place. Al
|
06-15-2020, 08:10 AM | #4 |
Senior Member
Join Date: May 2010
Posts: 500
|
Re: What do these fender skirts fit?
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|