model "a' electric fuel pump

[ken ct]

What kind and model # EFP can my friend use on an A to feed 2 81 carbs and what regulator. i realize he has to run through a fuel block. Where would i or he pick these up. Who sells what? thanks ken ct.

[lesbliss]

Ken:

I have had real good luck with Napa's 6V pump. Morrosco makes a great regulator and I see lots of fuel blocks on ebay.

Les Bliss

[James Rogers]

Go to NAPA and get one of their 12 volt pumps and use it. No regulator needed and it will work on 6 volts no problem. Don't believe me? Ask Brent in 10-u-c.

[LeroyM]

I use a Carter Rotary Vane type fuel pump. They sell them in 6 and 12 volts and I have had both and they work fine. Use a holley low pressure regulator. You can get both of them from Summitt online.

[PC/SR]

I use the napa low pressure pump, no regulator. It is 12 v. on a 12 v system.Speedway has a fuel feed that is two tubes fed by one connection from the pump. Avoids the hassle of a block, but probably not as good at even distribution I have Holley 92's which are similiar to the 81's in size and all works well.

[V4F]

Sponsored Links (Register now to hide all advertisements)

I use a Carter Rotary Vane type fuel pump. They sell them in 6 and 12 volts and I have had both and they work fine. Use a holley low pressure regulator. You can get both of them from Summitt online.
i use this same system . quite pump , good reliability ................ steve