The Ford Barn

clark51 · 01-02-2020, 12:15 PM

I am trying to do the alignment on my truck hood but don't know the order that the rubber bumpers should be installed. They are short, medium and tall in height . I don't know if the tall are in the back or the front. My original bumpers were missing. Thanks

FortyNiner · 01-02-2020, 01:20 PM

Biggest in back to smallest in front.

The hood alignment can be tricky - and counter-intitutive. Often to lower the nose, you must raise at the cowl.

clark51 · 01-02-2020, 04:51 PM

Sponsored Links (Register now to hide all advertisements)

Thanks I'll try that.

01-02-2020, 12:15 PM	#1
clark51 Junior Member Join Date: Feb 2017 Posts: 18	51 f1 hood bumpers I am trying to do the alignment on my truck hood but don't know the order that the rubber bumpers should be installed. They are short, medium and tall in height . I don't know if the tall are in the back or the front. My original bumpers were missing. Thanks

01-02-2020, 01:20 PM	#2
FortyNiner Senior Member Join Date: May 2012 Location: u-rah-rah-Wisconsin Posts: 1,136	Re: 51 f1 hood bumpers Biggest in back to smallest in front. The hood alignment can be tricky - and counter-intitutive. Often to lower the nose, you must raise at the cowl. __________________ 19 and 49 F1 - jes' like Henry II built 1946 Deluxe - as Henry built it

01-02-2020, 04:51 PM	#3
clark51 Junior Member Join Date: Feb 2017 Posts: 18	Re: 51 f1 hood bumpers Sponsored Links (Register now to hide all advertisements) Thanks I'll try that.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode