|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-23-2018, 09:34 AM | #1 |
Member
Join Date: Sep 2016
Location: Grapevine, Texas
Posts: 59
|
Grease Gun Fitting
Recently purchased a old style grease fitting tip from Snyders, and have run into a problem. Seems my gun (China) is threaded to a metric M10-1.0 while the tip is UNF at 3/8-24. Close, but no ceegar. Does anyone know of a decent hand-operated grease gun that is threaded to fit the 3/8-24 UNF size tip?
|
05-23-2018, 09:44 AM | #2 |
Senior Member
Join Date: Dec 2010
Location: FRESNO, CA
Posts: 12,560
|
Re: Grease Gun Fitting
I use a mixture of CHASSIS Grease & GEAR oil in steering boxes.
Bill Slick
__________________
"THE ASSISTANT GURU OF STUFF" |
Sponsored Links (Register now to hide all advertisements) |
|
05-23-2018, 11:41 AM | #3 | |
Senior Member
Join Date: May 2016
Location: Glide, Oregon
Posts: 1,336
|
Re: Grease Gun Fitting
Quote:
Not sure what that has to do with the grease gun tip fitting his grease gun... |
|
05-23-2018, 01:00 PM | #4 |
Senior Member
Join Date: May 2010
Location: Central, IL
Posts: 3,968
|
Re: Grease Gun Fitting
can you find a modern grease fitting to screw into the adapter that you can snap onto the standard end you have on your gun?
__________________
1929 Model AA - Need long splash aprons! |
05-24-2018, 08:31 AM | #5 | |
Senior Member
Join Date: Jun 2015
Location: Red Deer, Alberta
Posts: 5,042
|
Re: Grease Gun Fitting
Quote:
__________________
If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn! |
|
05-24-2018, 10:01 PM | #6 |
Member
Join Date: Sep 2016
Location: Grapevine, Texas
Posts: 59
|
Re: Grease Gun Fitting
Sponsored Links (Register now to hide all advertisements)
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|