The Ford Barn

Fibber Mcgee · 02-03-2019, 09:42 PM

What happened to Tod and his new Flathead?

deuce_roadster · 02-03-2019, 10:58 PM

My error, deleted post.

Fordors · 02-03-2019, 11:44 PM

Sponsored Links (Register now to hide all advertisements)

He has mentioned that the foundries have been screwing him over and at this time he is backed up machining 4 banger heads and intake manifolds for Snyder’s. To get around the foundry hassles he is working toward setting up a small in house operation to suit his needs. He has machined four cylinder blocks in both iron and aluminum, and there will be an available five main option for those but the V8 block has not progressed past the design stage AFAIK. Seems like the last he posted on that project was he had redesigned the V8 ports.
He posts on the HAMB using the screen name 427designer but it’s not very often he does, I assume he is just too busy.

02-03-2019, 09:42 PM	#1
Fibber Mcgee Senior Member Join Date: Oct 2010 Location: Callahan Fla Posts: 1,149	Tod? What happened to Tod and his new Flathead? __________________ Wanted, a car with a " Dynaflex Superflowing Unijet Turbovasculator which is Syncromeshed to the Multicoil Hydrotensioned Dual vacuum Dynomometer. "

02-03-2019, 10:58 PM	#2
deuce_roadster Senior Member Join Date: Oct 2011 Location: Shelton, WA Posts: 3,799	Re: Tod? My error, deleted post. Last edited by deuce_roadster; 02-03-2019 at 11:06 PM.

02-03-2019, 11:44 PM	#3
Fordors Senior Member Join Date: May 2010 Location: Orland Park,IL Posts: 1,402	Re: Tod? Sponsored Links (Register now to hide all advertisements) He has mentioned that the foundries have been screwing him over and at this time he is backed up machining 4 banger heads and intake manifolds for Snyder’s. To get around the foundry hassles he is working toward setting up a small in house operation to suit his needs. He has machined four cylinder blocks in both iron and aluminum, and there will be an available five main option for those but the V8 block has not progressed past the design stage AFAIK. Seems like the last he posted on that project was he had redesigned the V8 ports. He posts on the HAMB using the screen name 427designer but it’s not very often he does, I assume he is just too busy. __________________ My school colors are black and blue, I attended the School of Hard Knocks where I received a Masters Degree in Chronic Mopery.