11-30-2021, 12:56 PM | #1 |
Member
Join Date: May 2010
Posts: 54
|
97 stromberg
Whats the going price for a complete rebuild for 97 strombergs. I have been out of touch with the hobby for a while and my rebuilder has pass on .Thanks
|
11-30-2021, 01:05 PM | #2 |
Senior Member
Join Date: Jan 2011
Location: sw minnesota
Posts: 4,567
|
Re: 97 stromberg
About 225 from uncle max last time for me, but I believe it depends on if you need any parts or other special work. They come back looking and running like new.
|
Sponsored Links (Register now to hide all advertisements) |
|
11-30-2021, 02:15 PM | #3 |
Senior Member
Join Date: May 2010
Location: Encino California, near Burbank
Posts: 935
|
Re: 97 stromberg
Does "looking and running like new" include fresh chromate? Fred A
|
11-30-2021, 02:45 PM | #4 |
Senior Member
Join Date: Jan 2011
Location: sw minnesota
Posts: 4,567
|
Re: 97 stromberg
All the linkages are cad plated, and the carb body is rebushed, and a new finish of what, I forget. But heck, just ask max, not me, http://97-express.com/contact/
|
11-30-2021, 02:55 PM | #5 | |
Senior Member
Join Date: May 2010
Location: Above the gnat line in Georgia
Posts: 7,009
|
Re: 97 stromberg
Quote:
All carbs come back from Uncle Max looking/working just like God created them. Call it what you will.
__________________
Life is like a roll of toilet paper. The closer to the end, the faster it goes. It is better to be seen, than viewed. "We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm". |
|
11-30-2021, 03:31 PM | #6 | |
Senior Member
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,106
|
Re: 97 stromberg
Sponsored Links (Register now to hide all advertisements)
Quote:
WE used to have an "expert" rattle-can carb-rebuilder amongst us. Man, those were the days! DD . |
|
11-30-2021, 11:45 PM | #7 |
Senior Member
Join Date: Jan 2011
Location: sw minnesota
Posts: 4,567
|
Re: 97 stromberg
an old photo I had in stock of Max's handy work. Be careful, no drooling on the keyboard!
|
12-03-2021, 07:37 PM | #8 |
Junior Member
Join Date: Oct 2021
Location: Northern Utah
Posts: 20
|
Re: 97 stromberg
There is a gentleman here in Utah that is certified through Stromberg. He may be a good resource. He may even be able to rebuild and save what you have.
Sent from my LM-K500 using Tapatalk |
12-04-2021, 02:58 AM | #9 |
Senior Member
Join Date: May 2010
Location: Southern France
Posts: 5,301
|
Re: 97 stromberg
|
12-05-2021, 09:38 AM | #10 |
Senior Member
Join Date: May 2010
Location: Burton, Texas
Posts: 679
|
Re: 97 stromberg
I had Charlie NY do the Stromberg 97's on my '34 and '37 Fords. He did a great job on both of them and his service quick a reasonably priced.
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|