|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-27-2022, 10:13 AM | #1 |
Junior Member
Join Date: Jan 2021
Posts: 9
|
Looking for measurements on 32 sedan
Looking for the measurement between the screw holes at the a pillar that hold the sill plate. That's side to side. Does anyone know of a book with body measurements for the 32 sedan. Thanks
|
01-27-2022, 11:42 AM | #2 |
Senior Member
Join Date: May 2010
Location: Solihull, England.
Posts: 8,732
|
Re: Looking for measurements on 32 sedan
Hard to judge exactly what measurements you want, but here is a photo of the sill plate on my 32. You can see the screws. The second pic shows a horizontal screw near the front.
Mart. |
Sponsored Links (Register now to hide all advertisements) |
|
01-27-2022, 12:01 PM | #3 |
Junior Member
Join Date: Jan 2021
Posts: 9
|
Re: Looking for measurements on 32 sedan
I was looking from that front screw in the scuff plate to the same place on the other side of the car thanks
|
01-27-2022, 12:18 PM | #4 |
Senior Member
Join Date: May 2010
Location: Solihull, England.
Posts: 8,732
|
Re: Looking for measurements on 32 sedan
The horizontal one arrowed or the frontmost of the vertical screws?
Vertical screws: 38 to 38-1/16" It's a little hard to measure single handed as the seats are a slightly in the way. Rough measurement across the scuff plates at the front of the door opening is 36-5/8" |
01-27-2022, 12:32 PM | #5 |
Junior Member
Join Date: Jan 2021
Posts: 9
|
Re: Looking for measurements on 32 sedan
thanks
|
01-29-2022, 10:48 AM | #6 |
Junior Member
Join Date: Jan 2021
Posts: 9
|
Re: Looking for measurements on 32 sedan
Sponsored Links (Register now to hide all advertisements)
I was wondering if you could measure the flat part of the rocker right at the A pillar. Right were the door sits over it. thanks |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|