|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-08-2020, 06:53 AM | #1 |
Senior Member
Join Date: May 2010
Posts: 2,871
|
Installing the driver side visor on a '40
When the shop put the new headliner in, I had already removed the visor so they didn't think to mark the location of the slot & 3 screws. I checked an old '40 stock car out back, and made a template that helped me locate the slot & screw holes. Now I would like to know if there is some form of pad between the steel visor mounting flange and the headliner, and what length the screws are.
Thank you Fordbarners. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|