Go Back   The Ford Barn > General Discussion > Model A (1928-31)
Reload this Page Model A or B Cylinder Head Dimension

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 09-25-2019, 02:56 PM   #1
Jim Johnston
Senior Member
 
Jim Johnston's Avatar
 
Join Date: May 2010
Location: Newnan, GA
Posts: 106
Default Model A or B Cylinder Head Dimension
Does anyone have, or know, where I can view a drawing of an A or B cylinder head. I need the dimensions to locate the center of the flat squish area. Thanks.
Jim Johnston is offline   Reply With Quote
Old 09-25-2019, 05:19 PM   #2
BRENT in 10-uh-C
Senior Member
 
BRENT in 10-uh-C's Avatar
 
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,511
Default Re: Model A or B Cylinder Head Dimension
Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by Jim Johnston View Post
Does anyone have, or know, where I can view a drawing of an A or B cylinder head. I need the dimensions to locate the center of the flat squish area. Thanks.
The print is available at the Benson Ford Library in Dearborn.
__________________
.

BRENT in 10-uh-C
.
www.model-a-ford.com
...(...Finally Updated!! )

.
BRENT in 10-uh-C is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 12:32 PM.