Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 06-19-2020, 12:51 PM   #1
Ford coupe
Senior Member
 
Join Date: May 2010
Location: Napanee ontario Canada
Posts: 395
Default Silicone brake fluid

When building my 36 all info pointed to using dot 5 brake fluid so now after 8 yrs i blew a rear cylender and wonder if i made a wrong turn ...Is silicone as good as i was told?? Trouble now it is in there and it would be almost impossible to change it right?? I did change it to a hydraulic system from the old mechanical..
Ford coupe is offline   Reply With Quote
Old 06-19-2020, 12:59 PM   #2
40cpe
Senior Member
 
40cpe's Avatar
 
Join Date: May 2010
Location: Star, MS
Posts: 4,022
Default Re: Silicone brake fluid

I doubt that the fluid caused the cylinder to blow. Many, including myself have used the DOT 5 fluid for over 20 years with no issues. Most of the complaints come from it being harder to bleed, resulting in a soft pedal.
40cpe is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 06-19-2020, 01:02 PM   #3
V8COOPMAN
Senior Member
 
V8COOPMAN's Avatar
 
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,106
Default Re: Silicone brake fluid

This might be interesting! DD


__________________
Click Links Below __


'35-'36 W/8BA & MECHANICAL FAN


T5 W/TORQUE TUBE
V8COOPMAN is offline   Reply With Quote
Old 06-19-2020, 01:06 PM   #4
51 MERC-CT
Senior Member
 
51 MERC-CT's Avatar
 
Join Date: May 2010
Location: East Hartford, Ct
Posts: 5,898
Default Re: Silicone brake fluid

Yup?
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES
51 MERC-CT is offline   Reply With Quote
Old 06-19-2020, 01:11 PM   #5
Lawson Cox
Senior Member
 
Lawson Cox's Avatar
 
Join Date: May 2010
Location: Above the gnat line in Georgia
Posts: 7,009
Smile Re: Silicone brake fluid

I have been using DOT5 (Silicone) in several vehicles (Vintage) for several years, No problems. I doubt your problem is DOT5 related,
__________________
Life is like a roll of toilet paper. The closer to the end, the faster it goes.

It is better to be seen, than viewed.

"We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm".
Lawson Cox is offline   Reply With Quote
Old 06-19-2020, 01:51 PM   #6
tubman
Senior Member
 
tubman's Avatar
 
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,259
Default Re: Silicone brake fluid

Sponsored Links (Register now to hide all advertisements)
I had DOT 5 in a Corvette. After I got it bled properly, it was great. I had so much trouble getting it bled, I never used it again.

I did purchase an electronic brake fluid tester that shows the percentage of moisture in DOT 3 and 4. I test all of my vehicles annually and it appears that given the conditions under which they are used, the fluid will last at least 20 years before the moisture content will reach the critical level.
tubman is online now   Reply With Quote
Old 06-19-2020, 02:08 PM   #7
19Fordy
Senior Member
 
19Fordy's Avatar
 
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,872
Default Re: Silicone brake fluid

Gee, I've been using DOT 5 for 20 years. Zero problems. How could ANY brake fluid cause a cylinder to "blow". Does that mean the rubber end cap came off the cylinder?
19Fordy is offline   Reply With Quote
Old 06-19-2020, 02:16 PM   #8
A bones
Senior Member
 
A bones's Avatar
 
Join Date: May 2010
Location: CLAYTON DE
Posts: 1,280
Default Re: Silicone brake fluid

Replace the faulty parts, Retain the Dot 5.
__________________
Enjoy yer day. Tom
Hate can't fix what it started.
A bones is offline   Reply With Quote
Old 06-19-2020, 02:20 PM   #9
Automotive Stud
Senior Member
 
Automotive Stud's Avatar
 
Join Date: May 2010
Location: New Jersey
Posts: 831
Default Re: Silicone brake fluid

I've been running dot 5 for years also. The only issue I've had is pressure brake switches don't last, even those rated for dot 5, so I put lever switches in. They come on sooner anyway. Ironically, I just lost a right rear wheel cylinder last weekend. Putting a motor in one of my other cars at the moment, when I don't feel like working on that I'll pull the drum one night after work and swap that wheel cylinder.
Automotive Stud is offline   Reply With Quote
Old 06-19-2020, 02:36 PM   #10
TagMan
Senior Member
 
Join Date: Jul 2011
Location: Alvaton, Kentucky, USA
Posts: 952
Default Re: Silicone brake fluid

I ran DOT5 in an off topic car since 1986 with no problems.
TagMan is offline   Reply With Quote
Old 06-19-2020, 03:24 PM   #11
19Fordy
Senior Member
 
19Fordy's Avatar
 
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,872
Default Re: Silicone brake fluid

Automotive Stud, Use a Harley Davidson switch. Pick one up at a dealer.
https://www.ebay.com/itm/NEW-Hydraul...36f16e2186552a
19Fordy is offline   Reply With Quote
Old 06-19-2020, 11:53 PM   #12
Aarongriffey
Senior Member
 
Join Date: Feb 2020
Location: Hayward,CA
Posts: 513
Default Re: Silicone brake fluid

I replaced all five brake cylinders in my F1 pickup in January 2000.
Have not added or changed it yet.
I must change it soon. Twenty years is too long to not change it.
I have never had a problem with any car that I have put DOT 5 in.
However, I never change a cra over to Dot 5 unless I first change all 5 cylinders.
That stuff will leak like nothing you ever used before.
I never NEVER overhaul a cylinder that has been leaking. Never.
I will lightly hone and put new seals in a cylinder that shows no sign of leaking or weeping.
New cylinders are very inexpensive, especially on the cars we are discussing on this forum.

Changing back to Dot 3 or 4 is not that difficult. If you leave a little dot 5 in the system it won’t hurt a thing.
I’ve changed at least twenty old Fords over to DOT 5 and never had a problem with any of them. When they tell you it is too hard to bleed systems with dot 5 it’s time to stop listening to that guy.
I’ve replaced all brake lines and cylinders and used one pint to bleed the system and leave the master cylinder full. More than once.
But, I put a 1950 lever type stop light switch under the brake pedal of every car and truck that I use dot 5 in. They are for GMC and Chevy cars and trucks from around ‘50 or earlier to maybe ‘54 or later.
They come in both right and left sides the lever is on. I have never found a parts store that didn’t have one or both.
Aaron Griffey
Hayward, CA
Aarongriffey is offline   Reply With Quote
Old 06-20-2020, 06:55 AM   #13
richard crow
Senior Member
 
Join Date: May 2010
Posts: 1,763
Default Re: Silicone brake fluid

if you are converting to dot 5 make sure all your lines & fittings are super tight. dot 5 can find a leak where there was none before.
richard crow is offline   Reply With Quote
Old 06-23-2020, 10:56 PM   #14
[email protected]
Junior Member
 
Join Date: Jun 2018
Posts: 5
Default Re: Silicone brake fluid

The military has also been using DOT5 in their vehicles with hydraulic brakes for about 20 years at least.
shadyside1983@gmail.com is offline   Reply With Quote
Old 06-24-2020, 01:32 AM   #15
Rudolph
Senior Member
 
Rudolph's Avatar
 
Join Date: Aug 2014
Location: North island Newzealand.
Posts: 272
Default Re: Silicone brake fluid

I understand dot 5 is hard on rubber
Rudolph is offline   Reply With Quote
Old 06-24-2020, 09:27 AM   #16
TJ
Senior Member
 
TJ's Avatar
 
Join Date: May 2010
Location: Napa,California
Posts: 6,005
Default Re: Silicone brake fluid

Quote:
Originally Posted by Rudolph View Post
I understand dot 5 is hard on rubber
Never heard that one before. Where did that info come from? I've used Dot 5 for years and never heard anyone say it was hard on rubber.
TJ is offline   Reply With Quote
Old 06-24-2020, 06:49 PM   #17
Jim in Wisconsin
Senior Member
 
Join Date: Jan 2012
Posts: 247
Default Re: Silicone brake fluid

To me, a good reason to use dot 5 (silicone) brake fluid is that it doesn't damage paint. The bad thing is that it is expensive.
Jim in Wisconsin is offline   Reply With Quote
Old 06-24-2020, 10:20 PM   #18
V8COOPMAN
Senior Member
 
V8COOPMAN's Avatar
 
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,106
Default Re: Silicone brake fluid

Quote:
Originally Posted by Jim in Wisconsin View Post
To me, a good reason to use dot 5 (silicone) brake fluid is that it doesn't damage paint. The bad thing is that it is expensive.

In the almost sixty years that I've been messin' with these old, used cars, I have NEVER used Dot 5 fluid, and I've managed to be just careful-enough so as not to have damaged any paint with my Dot 3 fluids. POOR reason to use Dot 5! DD
__________________
Click Links Below __


'35-'36 W/8BA & MECHANICAL FAN


T5 W/TORQUE TUBE
V8COOPMAN is offline   Reply With Quote
Old 06-25-2020, 06:31 PM   #19
Jim in Wisconsin
Senior Member
 
Join Date: Jan 2012
Posts: 247
Default Re: Silicone brake fluid

I've only been messing with old cars since 1968, so you know more about it than me for sure.
To ME, it's a good reason.
Jim in Wisconsin is offline   Reply With Quote
Old 06-25-2020, 06:56 PM   #20
Aarongriffey
Senior Member
 
Join Date: Feb 2020
Location: Hayward,CA
Posts: 513
Default Re: Silicone brake fluid

There are a lot of good reasons to use DOT 5.
The fact that it won’t eat through the paint is just one of them.
I did a brake job on a nearly new 144 Volvo after the owner had filled the master right up to the top.
Sometime as I went around compressing the calipers and installing new pads the brake fluid squirted out the vent hole onto the left front fender.
By the time I saw it the fluid had eaten through the paint right down to the primer.
A co$tly error.
DOT5 is not that costly.
People that have cars with a $600 water pump or. $7,000 fuel tank because the fuel pump is sealed in it or $1,000 tires don’t complain about the price of DOT5.
Aarongriffey is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 09:45 AM.