Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 11-03-2014, 09:30 PM   #1
bmodeltman
Junior Member
 
Join Date: Nov 2010
Posts: 28
Default 2 piece front pulley

I have a new 2 piece pulley that has the 2 tabs that line up.The seal sleeve part of it has square cut tangs on it and the pulley part is cut so it has rounded corners and doesn`t fit tight against the sleeve.There`s about an 1/8 inch gap between pulley and sleeve.Is this suppose to be this way to press them together or do I have to file the pulley tangs to fit the sleeve?
bmodeltman is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 07:53 PM.