|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-25-2018, 04:57 PM | #1 |
Member
Join Date: May 2010
Posts: 55
|
40-48 ford drums
Hello , has anyone used the speedway 1940 drums with stock hubs. 1940 hubs or 46-48 hubs.. In need of rear drums and looking for a good alternative to finding originals.. They seem to be getting tougher to find lately. Just picking your brains.. thanks in advance, van
Last edited by V Clark; 11-25-2018 at 05:37 PM. Reason: wrong year |
11-25-2018, 08:12 PM | #2 |
Senior Member
Join Date: May 2010
Location: Orland Park,IL
Posts: 1,400
|
Re: 40-48 ford drums
I don’t know anything about the Speedway drums but be aware that ‘39-‘42 Ford drums have a register hole 3 1/4” in diameter and the ‘46-‘48’s are 4”.
__________________
My school colors are black and blue, I attended the School of Hard Knocks where I received a Masters Degree in Chronic Mopery. |
Sponsored Links (Register now to hide all advertisements) |
|
11-25-2018, 08:48 PM | #3 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,879
|
Re: 40-48 ford drums
Have you checked out MT Brake products? They sell hubs with new studs also. Use you old wheel bearings as the off shore are said to be inferior.
http://www.mtcarproducts.com/productsgrid.html |
11-26-2018, 12:31 AM | #4 |
Senior Member
Join Date: Nov 2015
Location: North Pole, Alaska
Posts: 2,646
|
Re: 40-48 ford drums
I just got a set of MT products drums for the 47 I’m working on. Top quality for sure.
|
11-26-2018, 01:15 AM | #5 |
Senior Member
Join Date: May 2010
Location: MN
Posts: 7,053
|
Re: 40-48 ford drums
Wish they did wide 5's too
|
11-26-2018, 02:10 AM | #6 |
Senior Member
Join Date: Nov 2015
Location: North Pole, Alaska
Posts: 2,646
|
Re: 40-48 ford drums
Sponsored Links (Register now to hide all advertisements)
|
11-26-2018, 12:00 PM | #7 |
Member
Join Date: May 2010
Posts: 55
|
Re: 40-48 ford drums
Thanks for the replies.. I am aware of the center reg. hole size dif. I have hubs for both but drums are shot. I have heard many views on offshore products that is why I posted here.. I will check out these sources.. van
|
11-26-2018, 06:47 PM | #8 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,879
|
Re: 40-48 ford drums
Stay away from off shore if you can.
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|