The Ford Barn

ModelA29 · 05-08-2023, 04:37 PM

Anyone have a spare Vortex intake? I like the dual updraft idea. No electric fuel pump required.
I'd use a bigger cam and aluminum head to run with it.
Any pointers from anyone running one?

jack backer · 05-08-2023, 05:35 PM

Two updrafts better than one updraft. One downdraft better than two updrafts

If you going to run dual updrafts use marvel schebler/ all state carburetors,,
Instead of the jets a zenith has it uses an emulsion tube design.. simple and effective

Sparky · 05-10-2023, 03:58 PM

I don't have a spare one, sorry. I have been running one for several years with two Model B zenith carbs. It runs great but does take a bit longer to warm up than the stock single carb. Unfortunately, I believe Charlie Yapp has stopped making them.

Jim Brierley · 05-12-2023, 10:50 AM

Sponsored Links (Register now to hide all advertisements)

Not running one but you are going in the right direction for adding power. Bigger, or multiple, carbs, and higher compression are the two easiest and quickest ways to increase power on our A's. Be careful on going to a bigger cam, too much is worse than stock. (and I grind cams)

05-08-2023, 04:37 PM	#1
ModelA29 Senior Member Join Date: Sep 2022 Location: SoCal Posts: 586	Vortex intake Anyone have a spare Vortex intake? I like the dual updraft idea. No electric fuel pump required. I'd use a bigger cam and aluminum head to run with it. Any pointers from anyone running one?

05-08-2023, 05:35 PM	#2
jack backer BANNED Join Date: Mar 2022 Location: Chenango Bridge NY Posts: 433	Re: Vortex intake Two updrafts better than one updraft. One downdraft better than two updrafts If you going to run dual updrafts use marvel schebler/ all state carburetors,, Instead of the jets a zenith has it uses an emulsion tube design.. simple and effective

05-10-2023, 03:58 PM	#3
Sparky Senior Member Join Date: May 2010 Location: Rhode Island Posts: 649	Re: Vortex intake I don't have a spare one, sorry. I have been running one for several years with two Model B zenith carbs. It runs great but does take a bit longer to warm up than the stock single carb. Unfortunately, I believe Charlie Yapp has stopped making them.

05-12-2023, 10:50 AM	#4
Jim Brierley Senior Member Join Date: Jun 2010 Location: Temecula, CA Posts: 4,087	Re: Vortex intake Sponsored Links (Register now to hide all advertisements) Not running one but you are going in the right direction for adding power. Bigger, or multiple, carbs, and higher compression are the two easiest and quickest ways to increase power on our A's. Be careful on going to a bigger cam, too much is worse than stock. (and I grind cams)