The Ford Barn

acereske · 03-16-2020, 01:01 PM

Clip needs for 1936 Ford Fordor Humpback Sedan stock. I'm looking for the clips that hold the capillary wire from the water temp sending unit to the temp gauge. They hold the capillary wire to the tube that holds the spark plug wires off of the engine. Any help would be greatly appreciated.

deuce lover · 03-16-2020, 01:05 PM

Bob Drake carries them ,part # 48-10882-S ,$6 a set of 3. Southside Obsolete might have them also.

35fordtn · 03-16-2020, 01:24 PM

If you are not going 100% authentic most all vendors have them (but they are half the width of originals). We have the correct width ones, but they are considerably more expensive than the others.

Don Rogers · 03-17-2020, 03:58 AM

Here's what the correct ones look like.

JM 35 Sedan · 03-17-2020, 11:33 AM

Quote:

Originally Posted by acereske

Clip needs for 1936 Ford Fordor Humpback Sedan stock. I'm looking for the clips that hold the capillary wire from the water temp sending unit to the temp gauge. They hold the capillary wire to the tube that holds the spark plug wires off of the engine. Any help would be greatly appreciated.

How many do you think you'll need??

acereske · 03-17-2020, 11:42 AM

Sponsored Links (Register now to hide all advertisements)

3 would be fine

acereske · 03-17-2020, 12:49 PM

35fordtn - I looked on your eBay store but couldn't locate the part. I am a frequent buyer of store. Could you contact me direct?

petehoovie · 03-17-2020, 01:19 PM

Drake shows them Out of Stock...Item Number: 48-10882-S

Your Price: $6.00 ST

Out of Stock

35fordtn · 03-17-2020, 02:52 PM

Quote:

Originally Posted by acereske

35fordtn - I looked on your eBay store but couldn't locate the part. I am a frequent buyer of store. Could you contact me direct?

It would take me a lifetime to list everything we have on eBay... Just give the shop a call during normal business hours 844-327-5988

35fordtn · 03-17-2020, 02:56 PM

For comparative measures, the clip on the far left is a Drake, the middle is ours and the right is a NOS.

35-36’s take two and 37-39 takes one. The drake ones when available are a lot more affordable. Ours are made here in the US which drives the cost way up sadly ($18 a pair)

For someone who could care less about the width difference, the Drake ones perform just fine and would be much easier on the wallet.

v8fordman · 03-17-2020, 07:33 PM

Buy the ones from Michael. At least he's an American with parts made in America and he won't send you a virus like China did.

VeryTangled · 03-17-2020, 08:24 PM

Quote:

Originally Posted by acereske

Clip needs for 1936 Ford Fordor Humpback Sedan stock. I'm looking for the clips that hold the capillary wire from the water temp sending unit to the temp gauge. They hold the capillary wire to the tube that holds the spark plug wires off of the engine. Any help would be greatly appreciated.

I did a whole lot of work on a '35 Fordor Touring Sedan (humpback) last year before bombing it on a 2k mile road trip. There are many, many good bits and bobs on this freshen-up job that came from 35fordtn's operation. You should absolutely make a list and dial the number. Good old fashioned fabulous service and correct/easy-to-fit essentials!

deuce lover · 03-18-2020, 12:50 AM

I found out from Drake that Carpenter is the manufacturer so they might have them besides Michael at Third Generation Auto.Drake will not restock them.

35fordtn · 03-18-2020, 09:12 AM

Quote:

Originally Posted by deuce lover

I found out from Drake that Carpenter is the manufacturer so they might have them besides Michael at Third Generation Auto.Drake will not restock them.

I have been a carpenter dealer and never realized until now they produced them. I ordered some in the AM so I can have a cheaper option available.

03-16-2020, 01:01 PM	#1
acereske Junior Member Join Date: Dec 2019 Location: Saginaw, MI USA Posts: 18	clips needes Clip needs for 1936 Ford Fordor Humpback Sedan stock. I'm looking for the clips that hold the capillary wire from the water temp sending unit to the temp gauge. They hold the capillary wire to the tube that holds the spark plug wires off of the engine. Any help would be greatly appreciated.

03-16-2020, 01:05 PM	#2
deuce lover Senior Member Join Date: May 2010 Location: Southern France Posts: 5,301	Re: clips needes Bob Drake carries them ,part # 48-10882-S ,$6 a set of 3. Southside Obsolete might have them also. Last edited by deuce lover; 03-16-2020 at 01:35 PM.

03-16-2020, 01:24 PM	#3
35fordtn Senior Member Join Date: Aug 2010 Location: McMinnville, TN Posts: 2,327	Re: clips needes If you are not going 100% authentic most all vendors have them (but they are half the width of originals). We have the correct width ones, but they are considerably more expensive than the others.

03-17-2020, 11:42 AM	#6
acereske Junior Member Join Date: Dec 2019 Location: Saginaw, MI USA Posts: 18	Re: clips needes Sponsored Links (Register now to hide all advertisements) 3 would be fine

03-17-2020, 12:49 PM	#7
acereske Junior Member Join Date: Dec 2019 Location: Saginaw, MI USA Posts: 18	Re: clips needes 35fordtn - I looked on your eBay store but couldn't locate the part. I am a frequent buyer of store. Could you contact me direct?

03-17-2020, 01:19 PM	#8
petehoovie Senior Member Join Date: May 2015 Posts: 8,076	Re: clips needes Drake shows them Out of Stock...Item Number: 48-10882-S Your Price: $6.00 ST Out of Stock __________________ The only thing nice about being imperfect is the joy it brings to others.... *"Silver rings, your butt! Them's washers!"* "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0

03-17-2020, 02:56 PM	#10
35fordtn Senior Member Join Date: Aug 2010 Location: McMinnville, TN Posts: 2,327	Re: clips needes For comparative measures, the clip on the far left is a Drake, the middle is ours and the right is a NOS. 35-36’s take two and 37-39 takes one. The drake ones when available are a lot more affordable. Ours are made here in the US which drives the cost way up sadly ($18 a pair) For someone who could care less about the width difference, the Drake ones perform just fine and would be much easier on the wallet.

03-17-2020, 07:33 PM	#11
v8fordman Senior Member Join Date: May 2010 Location: Lexington, NC Posts: 860	Re: clips needes Buy the ones from Michael. At least he's an American with parts made in America and he won't send you a virus like China did.

03-18-2020, 12:50 AM	#13
deuce lover Senior Member Join Date: May 2010 Location: Southern France Posts: 5,301	Re: clips needes I found out from Drake that Carpenter is the manufacturer so they might have them besides Michael at Third Generation Auto.Drake will not restock them.