|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-26-2019, 01:18 AM | #41 |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,413
|
Re: Y Block Valve Springs, Rocker Arms &c
No problem and THANX! for thanking...
|
04-27-2019, 07:23 PM | #42 |
Senior Member
Join Date: Jan 2012
Posts: 241
|
Re: Y Block Valve Springs, Rocker Arms &c
I can't find what diameter the rocker shaft should be? I check the 1956 Ford manual.
Thanks , Brian |
Sponsored Links (Register now to hide all advertisements) |
|
04-27-2019, 08:51 PM | #43 |
Senior Member
Join Date: Feb 2012
Location: Tampa fl
Posts: 130
|
Re: Y Block Valve Springs, Rocker Arms &c
.781 just measured one of mine
|
11-29-2019, 09:07 PM | #44 | |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,413
|
Re: Y Block Valve Springs, Rocker Arms &c
Quote:
... ... sigh ... ... you gotta wonder ... I made a mistake. That PN is for an FE. You want - EAA 6598-A - Spring Washer The solid washer is - EAA 6590-A - Washer - Rocker Arm Shaft Steel - 1.26" O.D. - .81 " I.D. (So this will be the sizing - Size not given in MPC) I am sincerely sorry. I am having the old lady call the home in the morning to begin processing ...
__________________
***** - DISCLAIMER -
The above posted information is in my opinion only (IMO) and may contain copy and paste material(s). In addition, any above tech information is supplied in good faith. No responsibility implied or otherwise can be accepted for the way others use or interpret provided data. Your experience(s), opinion(s) and mileage may vary. DIAGNOSED CDO - (OCD In Correct Alphabetical Order) |
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|