Front and rear seats, fordor, TS

[Terry,NJ]

Does any one have any pictures, drawings, diagrams, Anything! that will show the wood layouts for these two seats? I know I don't have all the pieces. What I need mostly are the pcs at the bottom of the front backrest.
Thanks in Advance, Terry

[Terry,NJ]

Btt

[Aerocraft]

Here are a number of pictures that might help. It would be helpful to the Fordbarner to be more specific as to which Fordor you need information about. There are significant differencers between the various models and years.

Gar Williams

https://www.google.com/search?q=mode...ml%3B640%3B480

[1930artdeco]

Terry I can give you some partial dimensions of the front bottom piece of wood. Will that help?

Mike

[Terry,NJ]

Gar, Thanks for posting this! Specifically I am looking for the angles and dimensions for the back of the bottom seat frame, My original wood was so bad in this area, I couldn't decide if it was a flat angle or a radius. I have to tie the vertical pieces in at the bottom. My car is a 1930 Briggs Town Sedan (T.S) and it's the front seat we're talking about. As near as I can tell, the angle at the back of the frame is 14/76 degrees. but I would like confirmation before I make any cuts. I still need the Dims. of the wood at the bottom of the front seat back rest or any other wood in the backrest.
Terry

Originally Posted by Aerocraft

Here are a number of pictures that might help. It would be helpful to the Fordbarner to be more specific as to which Fordor you need information about. There are significant differencers between the various models and years.

Gar Williams

https://www.google.com/search?q=mode...ml%3B640%3B480

[Terry,NJ]

Sponsored Links (Register now to hide all advertisements)

Yes! It will help a lot! I need dims. for the bottom of the back reat and any risers that may be used also. I don't know how the back rest/cushion is held in place. Most of my seat wood is in terrible shape or gone completely.
Terry

Originally Posted by 1930artdeco

Terry I can give you some partial dimensions of the front bottom piece of wood. Will that help?

Mike

[1930artdeco]

Ok let me see what I can take pics of for this weekend. I will pm them to you or send me your email for pics.

Mike

[Terry,NJ]

My email is [email protected] I'll look for them! Thanks a lot!
Terry