Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 10-30-2020, 05:25 PM   #1
39portlander
Senior Member
 
39portlander's Avatar
 
Join Date: May 2010
Location: Suth'N Maine
Posts: 1,784
Default 38/39 side hood badges.....

So who might have those little square end bolts that hold the badges to the hood sides. Any input would be great, I have some ideas to make a set but...
Attached Images
File Type: jpg IMG_0274.JPG (152.4 KB, 34 views)
File Type: jpg IMG_0275.JPG (113.7 KB, 31 views)
39portlander is offline   Reply With Quote
Old 10-30-2020, 05:31 PM   #2
GaryU.
Senior Member
 
GaryU.'s Avatar
 
Join Date: May 2010
Location: Madison,Wisconsin
Posts: 603
Default Re: 38/39 side hood badges.....

I took some same sized machine head screws and filled the slots with solder, then tin/zinc plated them to try to hide what they started as. Hoping nobody notices.
GaryU. is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 10-30-2020, 06:02 PM   #3
39portlander
Senior Member
 
39portlander's Avatar
 
Join Date: May 2010
Location: Suth'N Maine
Posts: 1,784
Default Re: 38/39 side hood badges.....

Sponsored Links (Register now to hide all advertisements)
That's a good idea Gary, If I can't locate the proper ones was going to braze a dot of solder on a brass bolt and use a square head nut spun to the end of the threads to hold it in the badge.
39portlander is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:02 AM.