The Ford Barn

lotsagas4u · 01-21-2020, 04:58 PM

My 33 inner fenders have 2 holes at front, for mounting to the bottom radiator splash shied. The replacement shield has 1 hole drilled on each side, did the original shield have 2 holes on each side? Thanks

DavidG · 01-21-2020, 06:52 PM

Yes, and on the '33 version clinch (D) nuts were originally installed in the four holes, two per side. The '34 version only has the plain holes, two per side. My impression is that all of the reproductions are of the '34 versions which have a number of other differences compared to original '33s, of which there are several versions depending on the point in time during the model year..

lotsagas4u · 01-21-2020, 07:03 PM

Sponsored Links (Register now to hide all advertisements)

Thought so, Thank You

01-21-2020, 04:58 PM	#1
lotsagas4u Senior Member Join Date: Apr 2011 Location: Plainview, Texas Posts: 757	1933 inner fender question? My 33 inner fenders have 2 holes at front, for mounting to the bottom radiator splash shied. The replacement shield has 1 hole drilled on each side, did the original shield have 2 holes on each side? Thanks

01-21-2020, 06:52 PM	#2
DavidG Senior Member Join Date: May 2010 Location: southeastern Michigan Posts: 10,094	Re: 1933 inner fender question? Yes, and on the '33 version clinch (D) nuts were originally installed in the four holes, two per side. The '34 version only has the plain holes, two per side. My impression is that all of the reproductions are of the '34 versions which have a number of other differences compared to original '33s, of which there are several versions depending on the point in time during the model year..

01-21-2020, 07:03 PM	#3
lotsagas4u Senior Member Join Date: Apr 2011 Location: Plainview, Texas Posts: 757	Re: 1933 inner fender question? Sponsored Links (Register now to hide all advertisements) Thought so, Thank You

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode