|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-15-2019, 08:00 AM | #1 |
Junior Member
Join Date: May 2019
Posts: 2
|
Trying to Identify Some Parts
Good morning! We've got some parts that we got that are supposed to be for a 30-31 Ford, but they weren't in boxes and didn't come labeled, so I have no idea what they are. A couple of these things look like headboards!
Any chance the forums know what these are? Thanks for any help! |
05-15-2019, 08:14 AM | #2 |
Senior Member
Join Date: May 2010
Location: New Jersey
Posts: 734
|
Re: Trying to Identify Some Parts
Well picture 3 is a pair of Model A rear window shade holders, picture 4 is appears to be part of a seat frame of unknown origin......
|
Sponsored Links (Register now to hide all advertisements) |
|
05-15-2019, 08:58 AM | #3 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,431
|
Re: Trying to Identify Some Parts
Photo No. 1 looks to be ID numbers stamped into some part of a vehicle. Ford only stamped the Model A engines above the coolant inlet and then on the left frame near the clutch pedal location. The ID code was begin with a star and ended with a star if they're Ford but I cant even tell if that parts are steel or cast iron from the photos plus I don't see any stars.
|
05-15-2019, 09:14 AM | #4 |
Senior Member
Join Date: May 2010
Location: PA Poconos
Posts: 723
|
Re: Trying to Identify Some Parts
Maybe I'm nuts, but I don't see any pictures!!!
|
05-15-2019, 09:29 AM | #5 |
Senior Member
Join Date: Jun 2015
Location: Red Deer, Alberta
Posts: 5,044
|
Re: Trying to Identify Some Parts
I cannae open the pictures.
__________________
If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn! |
05-15-2019, 09:38 AM | #6 |
Senior Member
Join Date: May 2010
Location: Michigan
Posts: 580
|
Re: Trying to Identify Some Parts
Sponsored Links (Register now to hide all advertisements)
|
05-15-2019, 09:55 AM | #7 |
Senior Member
Join Date: Dec 2011
Location: Oakville Ontario
Posts: 586
|
Re: Trying to Identify Some Parts
add me to the list of people who do not see pictures
|
05-15-2019, 10:36 AM | #8 |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 8,099
|
Re: Trying to Identify Some Parts
Same here , no pictures .
|
05-15-2019, 10:50 AM | #9 |
Senior Member
Join Date: Aug 2012
Location: Eastern Pa.
Posts: 543
|
Re: Trying to Identify Some Parts
Yup. No picture here either.
__________________
1929 Coupe 1930 Coupe 1935 Ford 5 window coupe |
05-15-2019, 04:08 PM | #10 |
Senior Member
Join Date: Apr 2014
Location: Kennesaw, Ga
Posts: 511
|
Re: Trying to Identify Some Parts
No pictures.
|
05-15-2019, 05:45 PM | #11 |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,496
|
Re: Trying to Identify Some Parts
None over here either!
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
05-15-2019, 07:45 PM | #12 |
Senior Member
Join Date: Aug 2017
Location: SoCal Desert
Posts: 826
|
Re: Trying to Identify Some Parts
I saw them earlier but cannot now.
Regards Bill |
05-16-2019, 11:56 AM | #13 |
Senior Member
Join Date: Dec 2014
Location: Shawnee, Ok
Posts: 3,471
|
Re: Trying to Identify Some Parts
Can't see any pictures...try this
Easy way for pics: Click the "blue post reply" lower left bottom of page, when text box opens, in the top middle of the bar you will see a "paperclip" next to the smiley face, click that, a window will open "manage attachments" click "choose file" then pick your picture, after you picked up to seven pics click the top "upload" on the right hand side of the text box, wait for it to upload. You must type something, anything into the text box message, scroll down to see "preview post" at bottom of your text box, you should see your message as it will appear when you post, if you like it click "submit reply" to post. Just make sure the picture file is not to large, if your pics are too big, attached them to an e-mail, don't send it, just copy/save once attached, they're smaller.
__________________
Keith Shawnee OK '31 SW 160-B |
05-22-2019, 10:19 AM | #14 |
Junior Member
Join Date: May 2019
Posts: 2
|
Re: Trying to Identify Some Parts
Sorry that the pictures disappeared! No idea why, they still show on the thread when I pop in.
Thanks for the tip on the seat frame and the window shade holders! It's surprisingly difficult to figure out what these things are! |
|
|
Sponsored Links (Register now to hide all advertisements) |
|