|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-24-2019, 06:53 AM | #1 |
Junior Member
Join Date: Feb 2017
Location: Texas
Posts: 27
|
292 Starter/Bell Housing Rubber Gasket
Does anyone have a P/N and source for the 292 Y block starter/bell housing gasket? I still have the one on mine, but it is looking a little mangled and would like to replace it before re-installing. The motor is currently out so the best opportunity to replace it is now. Thanks!
|
09-24-2019, 07:54 AM | #2 |
Senior Member
Join Date: Sep 2013
Location: Dighton, Mass
Posts: 1,225
|
Re: 292 Starter/Bell Housing Rubber Gasket
Mac's has those around 12 dollars, far as I know Ford Lincoln Mercury Y blocks up to
430 Merc / Lincolns. so go to mac's under starters... |
Sponsored Links (Register now to hide all advertisements) |
|
09-24-2019, 03:51 PM | #3 | |
Junior Member
Join Date: Feb 2017
Location: Texas
Posts: 27
|
Re: 292 Starter/Bell Housing Rubber Gasket
Quote:
Thanks Big Job! Here is a link if anyone else is looking: https://www.macsautoparts.com/ford_t...11-clutch.html |
|
10-09-2019, 11:47 PM | #4 |
Senior Member
Join Date: Feb 2013
Posts: 511
|
Re: 292 Starter/Bell Housing Rubber Gasket
Interesting link as it projects me to a Cor---te site.
|
10-10-2019, 10:33 AM | #5 |
Senior Member
Join Date: Aug 2012
Location: Abq, NM
Posts: 3,598
|
Re: 292 Starter/Bell Housing Rubber Gasket
A link to a starter seal at 'not a corvette' site.
https://www.classictbird.com/Starter...ductinfo/6436/ . Last edited by dmsfrr; 10-11-2019 at 07:06 PM. |
10-10-2019, 08:35 PM | #6 |
Senior Member
Join Date: May 2010
Location: Midland Park, NJ
Posts: 3,965
|
Re: 292 Starter/Bell Housing Rubber Gasket
Sponsored Links (Register now to hide all advertisements)
__________________
48 Ford Conv 56 Tbird 54 Ford Victoria |
10-10-2019, 08:49 PM | #7 |
Junior Member
Join Date: Feb 2017
Location: Texas
Posts: 27
|
Re: 292 Starter/Bell Housing Rubber Gasket
Not sure why it directed to a Corvette page, but that is where I got the starter/bell housing gasket. It was buried in the links for Antique cars when hitting the link I put in the post. At least it was not a european car site.
|
10-11-2019, 11:14 AM | #8 |
Senior Member
Join Date: Jun 2010
Location: Detroit suburb, MI
Posts: 3,697
|
Re: 292 Starter/Bell Housing Rubber Gasket
It brings you to the Ecklers Corvette site, but you have to click on MAC's at the top right of the screen. Must be the same owner.
Sal |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|