35 condenser

[old31]

This is the condenser I took out of my 35 Roadster.

Does anyone know what the NAPA part number is? I would like to pick one up tomorrow.

[35fordtn]

You must have a remote coil adapter plate. If you chose Napa go with a FA54. We sell the FA54 for $8.59. It will look different than the one you are currently using but is ideal for the Early Ford dual point distributors

[Lawrie]

Sponsored Links (Register now to hide all advertisements)

You can use a condenser like that one when using a rewound original coil, I use them on my fords.
What you do is put a 3/16 did screw in through the hole where the original condenser was , use a spacer and a lug for a spade type connection, then put a spade type end on the condenser wire , and mount the condenser onto a little mount onto the top bolt on the timing cover, then its a nice looking installation, AND if you have to change one on the road its an easy job.
Lawrie