The Ford Barn

chkolar · 05-31-2023, 09:19 AM

Does anybody have a good idea how much a GAZ engine head is worth?

rotorwrench · 05-31-2023, 12:20 PM

It would be a GAZ owner that would be looking for them for the most part. It may be more or less valuable depending on how many are still floating around Russia and eastern Europe. Another concern would be the compression ratio but I have no idea what GAZ manufactured in that respect.

john charlton · 05-31-2023, 01:07 PM

A GAZ jeep owner contacted me as his head had frost cracks , He sent me pictures and it looked like a standard 3 bolt water pump "B" head it even had the "C" between no.2 and 3 spark plug holes . Looks like the GAZ factory still used the Ford head casting mould . I sold him a regular "B" which bolted right on . He was a happy bunny . As for value whether "A" or "B" head I think would be no different from a regular USA head .

John in no weather today Suffolk County England .

Gary WA · 05-31-2023, 02:23 PM

Quote:

Originally Posted by chkolar

Does anybody have a good idea how much a GAZ engine head is worth?

Model 'A' Ford Garage ~ Model 'B' Ford Garage go to Cylinder head and gasket section. Thanks to supplier for site use.

ronn · 06-02-2023, 05:54 AM

Sponsored Links (Register now to hide all advertisements)

I wouldnt want it, so to me nada.

05-31-2023, 09:19 AM	#1
chkolar Junior Member Join Date: Jul 2012 Posts: 28	GAZ head Does anybody have a good idea how much a GAZ engine head is worth?

05-31-2023, 12:20 PM	#2
rotorwrench Senior Member Join Date: Jun 2010 Location: San Antonio, Texas Posts: 16,422	Re: GAZ head It would be a GAZ owner that would be looking for them for the most part. It may be more or less valuable depending on how many are still floating around Russia and eastern Europe. Another concern would be the compression ratio but I have no idea what GAZ manufactured in that respect.

05-31-2023, 01:07 PM	#3
john charlton Senior Member Join Date: May 2010 Posts: 1,304	Re: GAZ head A GAZ jeep owner contacted me as his head had frost cracks , He sent me pictures and it looked like a standard 3 bolt water pump "B" head it even had the "C" between no.2 and 3 spark plug holes . Looks like the GAZ factory still used the Ford head casting mould . I sold him a regular "B" which bolted right on . He was a happy bunny . As for value whether "A" or "B" head I think would be no different from a regular USA head . John in no weather today Suffolk County England .

06-02-2023, 05:54 AM	#5
ronn Senior Member Join Date: Feb 2011 Location: NNNNNNNNJJJJJJJJJJ Posts: 6,782	Re: GAZ head Sponsored Links (Register now to hide all advertisements) I wouldnt want it, so to me nada.