|
10-06-2016, 03:17 PM | #1 |
Member
Join Date: Apr 2015
Location: Tamborine Mountain,Queensland, Australia
Posts: 85
|
engine paint
Am about to install an overhauled engine but need to paint it first. I am aware that Ford Engine Green is the correct colour but am unable to find an equivalent colour in Australia. We are unable to import paint due to flight safety restrictions.
Any equivalent colour suggestions available in Australia would be appreciated. |
10-06-2016, 03:28 PM | #2 |
Senior Member
Join Date: May 2010
Location: Central, IL
Posts: 3,968
|
Re: engine paint
I know there are some Aussies on here that would know. Maybe call one of the Aussie model a stores and see what they say.
__________________
1929 Model AA - Need long splash aprons! |
Sponsored Links (Register now to hide all advertisements) |
|
10-06-2016, 04:12 PM | #3 |
Senior Member
Join Date: Aug 2016
Location: Alberta
Posts: 930
|
Re: engine paint
I'm sure i read somewhere on this forum that John Deere green with a bit (I don't know how much) of black makes a good representation of the original ford engine green. Might be worth an experiment or two.
|
10-06-2016, 05:49 PM | #4 |
Senior Member
Join Date: Aug 2010
Posts: 260
|
Re: engine paint
I have the paint chip catalog. I mix one part john deere green and one part rustoleum gloss black. Its very inexpensive compared to the dealers.
nick c |
10-06-2016, 10:21 PM | #5 |
Senior Member
Join Date: May 2010
Location: albany
Posts: 466
|
Re: engine paint
50's 303/324 Oldsmobile engine green is pretty darn close
|
10-06-2016, 11:10 PM | #6 |
Senior Member
Join Date: Dec 2011
Location: New hope Minnesota
Posts: 742
|
Re: engine paint
Sponsored Links (Register now to hide all advertisements)
|
10-06-2016, 05:00 PM | #7 |
BANNED
Join Date: May 2010
Location: Michigan / Ontario border, Sarnia, Ontario. 50 miles from Detroit and 150 from Toronto.
Posts: 5,800
|
Re: engine paint
Send it by sea on a freighter. Wayne
|
10-06-2016, 11:52 PM | #8 | |
BANNED
Join Date: May 2010
Location: Michigan / Ontario border, Sarnia, Ontario. 50 miles from Detroit and 150 from Toronto.
Posts: 5,800
|
Re: engine paint
Quote:
|
|
10-07-2016, 01:20 AM | #9 |
Senior Member
Join Date: May 2010
Location: Central, IL
Posts: 3,968
|
Re: engine paint
whatever you do buy more or mix more than enough - i bought a few spraycans from different suppliers, one suppliers can was pretty "normal" ford green - almost like a British racing green. One had more blue tint to it and didnt match, one as darn near black it was so dark of a green...
__________________
1929 Model AA - Need long splash aprons! |
10-07-2016, 07:28 AM | #10 |
Senior Member
|
Re: engine paint
Do you have rustoleum paint there?
In gloss Rustoleum it is 2 parts forest green 1 part flag blue 1 part black
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II |
10-07-2016, 10:41 AM | #11 |
Senior Member
Join Date: Aug 2010
Posts: 260
|
Re: engine paint
Correction, 2 parts john deere green and one part black, sorry about the mistake.
nick c |
10-07-2016, 11:15 AM | #12 |
Senior Member
Join Date: May 2010
Location: Van, Texas
Posts: 1,122
|
Re: engine paint
I mix my own 'cause the dealers charge too much for spray cans.
Mike V 's combination is very - very close 2 parts Rustoleun Forest Green, 1 part flag blue, 1 part black. I bough quarts of each and mix a baby food jar at the time. Keep it sealed - tight. kenb |
10-08-2016, 07:36 AM | #13 |
BANNED
Join Date: May 2010
Location: Michigan / Ontario border, Sarnia, Ontario. 50 miles from Detroit and 150 from Toronto.
Posts: 5,800
|
Re: engine paint
$15.95 a pint.The problem with home made is it looks homemade. A spray can of engine paint is $6.95 at Snyders or $15.95 a pint can. I can't believe most people can't afford this. Wayne
Last edited by C26Pinelake; 10-08-2016 at 09:24 AM. |
03-24-2017, 08:21 AM | #14 |
Member
Join Date: Jan 2017
Location: Fairless Hills, Pa
Posts: 30
|
Re: engine paint
synders can and spray do not match, same manufacturer, but different colors. I learned the hard way
|
01-14-2017, 09:45 PM | #15 |
BANNED
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
|
Re: engine paint
Thanks Ken for that info:::
|
10-07-2016, 02:33 PM | #16 |
Member
Join Date: Apr 2015
Location: Tamborine Mountain,Queensland, Australia
Posts: 85
|
Re: engine paint
Thanks everyone for your replies. I went to the local paint shop and got him to mix up some John Deere Green then he added some black and a small amount of blue. The end result is not perfect but close enough. Other than images on the internet, I don't have a sample to compare it with.
|
10-08-2016, 02:37 AM | #17 |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,496
|
Re: engine paint
I'm sure Keith Eastwood of "Henry's MOdel T and A parts" would have some. ( (03) 5368 1088)
If your car is Canadian, as most are here, Ford green is not correct, I have been told. The Canadians used a more grey colour. Any Canuks reading??? If you PM me with your address, I'll send you a patch from my can (of green) and you can have it matched at your local hardware store.
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. Last edited by Synchro909; 10-08-2016 at 03:09 AM. |
10-08-2016, 07:31 AM | #18 |
Member
Join Date: Nov 2015
Location: Edgerton, Kansas
Posts: 42
|
Re: engine paint
Mike V - does it matter if the black is flat or gloss?
|
10-08-2016, 07:39 AM | #19 |
Senior Member
Join Date: May 2010
Location: Victoria, Australia
Posts: 1,176
|
Re: engine paint
KBS Coatings produce a green that is darker than the USA engine green, and closer to the dark green that was used here. They even call it Ford engine green. Made in Australia too.
|
10-23-2016, 07:36 PM | #20 | |
Member
Join Date: Apr 2015
Location: Tamborine Mountain,Queensland, Australia
Posts: 85
|
Re: engine paint
Quote:
I have phoned KBS and they confirm they are able to mix some up for me so will order some.. Thanks for the info. Regards, Chris. |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|