New to Y-block, Intake Manifold Puzzle

[Tinker]

Ill just call it, nice. Get a couple of y block books and read through them. Best i can suggest.

[Dobie Gillis]

Will do.

[Tinker]

Not sure the length but pull one of the front bolts and match up the threads and size. I wouldnt put a bolt in the threads more then a half inch. Threads are in the head, not the intake. Or pick up a bolt set for the right intake you have, probably 10 bucks.

[GREENBIRD56]

I'll stick in two cents here, quick like - be certain you don't put too long a capscrew into the head from that position. It is lined up to interfere with the nearby pushrod and can (and will) cause more trouble than you bargained for.......

[Dobie Gillis]

Not to worry. I gotta pull the intake to change out the leaky valley cover gasket so I'll be able to measure how much capscrew I need at the same time.